Best 1/4 Pipe Drill Size
Best results for 1/4 pipe drill size
Drill America 1-1/4"-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series
$32.49
$45.16
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
DEWALT DW4901 1-Inch Crimped End Wire Brush
$4.99
$6.19
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- This are easy to use
- This are highly durable
- This is manufactured in China
- Constructed with internal holding plate to ensure consistency and safety
- Wire is 100 percent inspected to meet demanding quality specifications
- Constructed with internal holding plate to ensure consistency and safety
Migiwata 1/4 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 10pcs – Jobber Length and Straight Shank – Extremely Heat Resistant – Suitable for Drilling in Stainless Steel and Iron
$18.96
$27.68
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Cobalt Steel - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- For Stainless Steel - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
Drill America 1/4" Carbon Steel NPT Pipe Tap and 7/16" High Speed Steel Drill Bit Set, POU Series
$11.18
$13.30
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- 1/4" carbon steel NPT tap and 7/16" HSS drill bit
- Set comes in plastic pouch
- Set contains matching NPT pipe tap and high speed steel drill bit
Weiler Round Power Tube Brush, Steel, Round Shank, Single Stem, 1-1/4" Diameter, 0.008" Wire Diameter, 1/4" Shank, 2000 rpm (Pack of 1)
$5.85
$6.96
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Use fully chucked on smooth or threaded blind holes
- A round tube brush is most effectively used fully chucked on smooth or threaded blind holes
- Applicable for deburring and cleaning drilled holes and internal threads
- cleaning and finishing internal diameters of pipes and tubes
- Also used for deburring and cleaning internal keyways and grooves, carbon removal, crosshole deburring
Century Drill and Tool 95201 Plug Hand Pipe Tap, 1/8-27 NPT
Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" in Wooden Case
$63.43
$94.51
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
DEWALT DWA1789IR 7/8-Inch-1-1/8-Inch IMPACT READY Step Drill Bit
Century Drill & Tool 93202 1/4-18 NPT Tap and 7/16" Drill Combo Pack
$13.98
$17.75
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Tap and drill Combo pack offers correct drill size for the tap in one convenient package
- Tap offers precision cut threads, accurately formed for consistent, exact threading
- Tap is heat treated and tempered for file hard threads, and longer, useful life
- Tap designed for hand cutting applications
- Drill bit made of premium grade high speed steel
SSPIN300 Swaging Tool Drill Bit Set with 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” Bits
$81.44
$121.35
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Set of 6 Swaging Tools
- Revolutionizing system for molding tubes using heat by friction way more surface of contact between the flare and the Valve
- Way more surface of contact between the flare and the Valve
- Up to 10x faster than the conventional tools: flares in 5 seconds!
- Replaces / Supersedes: SSPIN-300 , 1484395631098 , 662766610703 , 366185 and Similar Swaging Tools.
Hanson 1903ZR Tap 1/4"-18Npt Taper, for Tap Die Extraction
$8.18
$10.88
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Each taper tap is used to cut internal threads in pipes
- This taper tap is ideal for pipe fittings
- Taps are tapered at a rate of 3/4 inches per foot
- Nominal size of the tap is that of the pipe fitting being tapped
- 1/4" size with 18 NPT (National Pipe Taper)
IRWIN 1905ZR Tap 1/2-14" Npt Pipe
RIDGID 29983 223S Stainless Steel Pipe Reamer, 1/4-inch to 1-1/4-inch Inner/Outer Reamer
$37.26
$52.54
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Ideal for reaming on stainless steel and copper tubing
- 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes
- Hardened steel construction for maximum durability
- dual inch and metric measurement bar for ease of use
- Pipe reamer has a 1/4-inch to 1-1/4-inch (6 mm to 40 mm) outside diameter capacity
- RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$22.89
$31.36
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
Best Choice 40-Piece Tap and Die Set – SAE Inch Sizes | Essential Threading Tool with Storage Case
$26.99
$30.50
Amazon.com
Last update was on: May 16, 2024 6:51 pm
- PREMIUM MATERIAL AND DURABILITY: Industrial grade GCr15 bearing steel construction ensures durability and tool longevity
- EXCELLENT CUTTING PERFORMANCE: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- TAPERED TEETH DESIGN: Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading
