Best 5 Speed Drill Press Zj4113

• Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
• Adjust between five speeds from 600 to 3100 RPM
• Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Durable 3.2-amp motor provides ample torque and power
• 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

• Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
• Adjust between five speeds from 600 to 3100 RPM
• Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Durable 3.2-amp motor provides ample torque and power
• 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III

• Spindle travel of 2-2/5 in. with easy to read, adjustable depth stop for accurate and repeatable drilling operations
• 8 in. x 7-2/3 in. cast iron worktable features rack and pinion height adjustment and bevels up to 45 degrees left and right
• Laser target your drilling operation marked with an X-pattern display
• Includes drill press, mechanical variable speed, 1/2 in. keyed chuck and key, laser, and tools for assembly

• Premium quality cross-slide Milling Vises features perfectly aligned precision growned jaws
• 5 Inch Wide Jaw
• Trust your best work with these quality milling vises
• Made from the highest quality ductile Iron 80000 PSI for minimum bending
• Longitudinal/Cross Travel and adjustable gibs