Best Delta Floor Drill Press
Best results for delta floor drill press
JET 354170/JDP-20MF 20-Inch Floor Drill Press
$152.45
$202.76
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
- Adjust between five speeds from 600 to 3100 RPM
- Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Durable 3.2-amp motor provides ample torque and power
- 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right
WEN 4210T 10 In. Drill Press with Laser
$670.00
$824.10
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Cast iron head
- Large quill allows greater accuracy
- Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
- Table tilts 45°
- Large ground steel column diameter for maximum head and table support
JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press
Milescraft 5342 Drill Stop Set, 6-Piece
Einstein Tool Co. 1/2" JT33 Drill Chuck 2 MT Arbor/Mount for Lathes and Drill Presses Two Keys
$24.40
$34.16
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Grip woods, metals, plastics and more
- Cast iron construction provides stability to drilling operations
- 3-inch jaws open up to 3-1/10 inches with a 1-inch throat depth
- Includes four onboard mounting slots to securely fasten the vise to a drill press table
- Universal design compatible with the majority of drill presses on the market (see images for base dimensions)
WEN 423DPV 3-Inch Cast Iron Drill Press Vise
$9.55
$11.75
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Nickel thumb grip styles increase leverage and user comfort
- Soft steel handles Limit the potential for dangerous fracturing under excessive load
- Self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening
- Never apply extensions, Pliers, wrenches or 'cheaters' Of any kind to chuck key handles
- Do not subject chuck key handles to hammer or other impact blows
Jacobs 3653 K3C Thumb Handle Chuck Key with 5/16-Inch Pilot-Size for Jacobs Series 34-33C ,633C Keyed Chucks
$47.95
$59.94
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Clamping Range: 3/16" - 3/4". (PLEASE NOTE THE DRAWS DO NOT CLOSE ENTIRELY TO ZERO RATHER IT CLOSE TO 3/16")
- Chuck Overall Length: 4.33"
- Shank Diameter: 2.57"
- Shank Size: 2MT (Morse Taper #2) PLEASE NOTE THE TAPER IS MT2 (SPINDLE HOLE DIA OF DRILL PRESS SHALL BE 0.70'. )
- Accuracy: 0.005"
- JT3 Mounted
3/16"- 3/4" Heavy Duty Drill Chuck with 2MT Arbor In Prime Quality (Morse Taper No.2)
$89.38
$117.09
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
WEN 4208 8 in. 5-Speed Drill Press
$262.37
$367.32
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
- Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
WEN 4214 12-Inch Variable Speed Drill Press
Lisle 12060 Large Magnetic Chuck Key
$7.08
$9.63
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Centerlines ensure accurate alignment when drilling into various surfaces
- Non-slip feet holds the DrillBlock in place while preventing both slipping and marring on wooden work pieces
- The two product v-grooves allow for usage on corners and even cylindrical surfaces too
Milescraft 1312 DrillBlock- Handheld Drill Guide
POWERTEC 71012 Drill Press Clamp, 9-Inch
$49.74
$70.63
Amazon.com
Last update was on: November 16, 2024 10:35 am
- Heavy-duty cast iron and steel construction prevents walking and wobbling during operation
- 9.9-inch by 12.4-inch steel mounting plate accommodates a variety of bolt orientations
- Measures in at 31.5 inch height with an onboard water pot to cool down projects
- Compatible with the entire line of WEN Bench Grinders
- Universal design fits the majority of bench grinders on the market
