Best 1 4 Drill Tap Size
Best results for 1 4 drill tap size
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
$9.24
$11.46
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Greenlee DTAP1/4-20 Combination Drill and Tap Bit, 1/4-20NC
$7.85
$9.81
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Ideal for creating and threading fasteners holes in metal
- Creates 28 threads per inch
- Drill bit constructed of high speed steel for fast and precise drilling
- Tap crafted of high carbon steel for general purpose drilling
- Includes 1 drill bit and 1 tap
IRWIN HANSON 1/4" – 28 NF Tap and No. 3 Drill Bit Set, 80232
$13.98
$20.83
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Tap and drill Combo pack offers correct drill size for the tap in one convenient package
- Tap offers precision cut threads, accurately formed for consistent, exact threading
- Tap is heat treated and tempered for file hard threads, and longer, useful life
- Tap designed for hand cutting applications
- Drill bit made of premium grade high speed steel
Century Drill & Tool 93202 1/4-18 NPT Tap and 7/16" Drill Combo Pack
$13.99
$17.07
Amazon.com
Last update was on: September 20, 2024 2:00 am
- 6Pcs Hex Shank Drill Bits Set Inculued Size: 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm)
- Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.
- Suitable for Low Hardness Materials Such as Wood, Aluminium Plate, Plank, Plastic, or Sheet Iron (thickness of less than 3mm).
- One-step Processing, Drilling, Tapping, Deburring and Countersinking in One Operation, Working Efficiently and Saving Time and Labor.
6Pcs/Set Hex Shank Drill Bits HSS 4341 Combination Drill and Tap Bit Screw Tap Deburr Countersink Bit (6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC)
$8.18
$12.02
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Each taper tap is used to cut internal threads in pipes
- This taper tap is ideal for pipe fittings
- Taps are tapered at a rate of 3/4 inches per foot
- Nominal size of the tap is that of the pipe fitting being tapped
- 1/4" size with 18 NPT (National Pipe Taper)
Hanson 1903ZR Tap 1/4"-18Npt Taper, for Tap Die Extraction
$9.52
$13.33
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Non-Spray cutting fluid
- Use for tapping, threading, drilling and reaming
- Use on ferrous metals and non-ferrous alloys
- Apply directly on the work surface
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!
Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz
$13.44
$17.07
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes
- They are recommended for use in through or blind holes
- Allow for chip accumulation in the bottom of the hole
- Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics
- High speed steel spiral point tap
Drill America 1/4"-28 High Speed Steel Left Hand Spiral Point 2 Flute Tap, DWT Series
Irwin Tools 1788673 IRWIN High Carbon Steel Bottom Tap 1/4" – 28 Nf, No.7 28 Nf Carded (1788673),
Irwin Tools 2620- 3 Piece High Carbon Steel- Tap 1/4" – 20 NC
$32.49
$42.89
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
Drill America 1-1/4"-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series
$10.69
$13.79
Amazon.com
Last update was on: September 20, 2024 2:00 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance
$59.99
$71.99
Amazon.com
Last update was on: September 20, 2024 2:00 am
- This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.
- Ideal for Restoring Damaged Threads, Suitable for Engine Repair and Other Automotive Applications
- The kit Has Altogether 131 Pieces, All Made According to Professional Standard.
- Lt Has One HSS Tap for Each Size, One HSS Drill for Each Size, 2 Insert Tools for Each Size, Thread Inserts for Each Size, All Come Complete in a Handy Storage Case.
HORUSDY 131Pc Thread Repair Kit, HSS Drill Helicoil Repair Kit SAE，1/4" 5/16" 3/8" 7/16" 1/2"
$11.89
$17.72
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$7.65
$9.10
Amazon.com
Last update was on: September 20, 2024 2:00 am
- N/A
- Imported
- Ideal for creating and threading fasteners holes in metal
- Creates 20 threads per inch
- Drill bit constructed of high speed steel for fast and precise drilling
- Tap crafted of high carbon steel for general purpose drilling
IRWIN HANSON 1/4" – 20 NC Tap and 13/64" Drill Bit Set, 80230
$39.99
$49.19
Amazon.com
Last update was on: September 20, 2024 2:00 am
- ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses
- ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel
60-Piece Master Tap and Die Set – Include Both SAE Inch and Metric Sizes, Coarse and Fine Threads | Essential Threading and Rethreading Tool Kit with Complete Accessories and Storage Case
$3.61
$4.12
Amazon.com
Last update was on: September 20, 2024 2:00 am
- Heat treated and tempered for file hard threads, and longer, useful life
- Designed for hand cutting applications
- Plug style tap is the most commonly used style of tap - 3 to 5 threads chamfered at tip
- NF stands for national fine threads
- Use #3 drill bit for best results
