Best How To Change Vacuum Pump Oil

The Koehler Transfer Pump Kit allows for the safe and easy transfer of liquids between containers or vehicles, eliminating the risky practice of siphoning dangerous liquids by mouth. Transfer gasoline, oil, antifreeze and other liquids simply and quickly with no mess. The pump can also be adapted to an air pump function for inflating tires, air mattresses, sports equipment, water toys and other inflatables. Each kit includes a multi-use siphon pump, 1 each liquid intake and discharge hoses, two hose connectors, 1 each inlet and outlet nozzles, an air pressure hose and dipstick tube. Ideal for auto and equipment maintenance, RV and boat owners, farm, marine and industrial operations or any other application requiring easy and efficient fluid transfers.

Specification:

Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm

Package include:

1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
 1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil 
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out

Note: If you want to connect this pump to AC power, you will need a power converter.

The Topsider’s reliability and convenience has long been trusted by boaters for easy, no mess oil changes, and other marine and automotive maintenance applications. No electricity required, the Topsider multi-purpose vacuum pump-out system uses a vacuum to pull oil out of your crankcase. A 12 inches diameter stance provides a stable base, eliminating potential tip-overs and spills, simply slide the withdrawal hose down your dipstick hole, open the valve and wait for 8 to 10 minutes. All of your old oil will be drawn into the Topsider’s 8 Quart container. Very easy to use, suction probe and instructions included.

GermGuardian FLT4825 True HEPA GENUINE Replacement Filter B is a combination filter. It includes a True HEPA filter that captures 99.97% of allergens as small as .3 microns. It also contains a pre-filter/activated carbon filter that captures odors from cooking, pets and smoking. It is recommeded to use with with GermGuardian AC4900, AC4825, AC4850PT, PureGuardian AP2200CA and Black+Decker Model BXAP148. The use of this genuine Guardian Technologies replacement part will maintain the product’s performance. To protect against electrical hazards, do not immerse in water or other liquids, do not use near water

The MVA6851 has a fluid capacity of up to 7 oz. (200 cc) and is ideal for removing used fluids from master cylinders, transaxles, and power steering and coolant reservoirs prior to bleeding, fluid changes or repairs. Featuring a 7.5-in. (190 mm) flexible tube with non-drip cap, the fluid extractor’s lightweight, streamlined design enables access into tight spaces. Also, the tool is easy to clean, and the hose and seal are simple to replace. High Quality Image Specifications: Packaged Weight: 0.7 lb (0.32kg) Packaged Size: 11.8 x 2.5 x 2.5 (300mm x 140mm x 230mm)

The OEMTOOLS fluid Evacuator has a 1.4 gallon (5.6 Quarts) reservoir with hand operated pump to tackle Big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.

Product Description

Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil. The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for boats, cars, trucks and more. USA dimensions: 16 inch length x 7 inch width x 11 inch height, tank size: 8 gallon, suction hose length 48 inches.

Amazon.com

Changing engine oil can be messy, time consuming and it is difficult to dispose of old oil. The LiquiVac is a user friendly and an environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, open the cap’s valve and LiquiVac extracts the oil directly into its plastic holding tank. It works great for boats, cars, trucks–and small engines too.

Quickly change the oil in large engines–works with small engines too

Cars and Trucks Oil Change

The LiquiVac Oil Changing System for Large Projects and Engines makes car oil changes quick, clean, and easy. This is especially true with hard to access drain plugs found in large engines.

An average car or truck takes approximately 8-10 minutes to extract the oil, and without a mess. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes of boats, cars, and light trucks. Plus, its tank has an 8 quart capacity allowing the user to make multiple oil changes of small engines too.

Boats

The LiquiVac innovative design makes it easier to change the oil in engines such as boats with inaccessible drain plugs. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes to make your 4-cycle outboard oil change and inboard oil change easy. Also, don’t forget the LiquiVac makes boat transmission changes very easy.

Small Engines: Lawnmowers, Generators, Power Washers, Snow Throwers, and More

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil and, eventually, engine breakdowns.

With the LiquiVac small engine oil changes are a snap. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines super simple.

Which Model of LiquiVac Is Right for You?

LiquiVac Small Engine Model

Small Engine Model

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.

But, now there’s a simple, fast and clean way to change your lawn and garden equipment’s oil. It’s the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle. Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as.

LiquiVac Large Project/Engine Model

Large Project/Engine Model

It is called the Large Project/Engine Model for a reason. Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. They can do it fast, without the mess. Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too.

Mityvac air operated evacuator provides a clean, fast and simple way to evacuate fluids. It features a base mounted Venturi adding stability during operation and the air and fluid-line shift off valves prevent the unit from overfilling during use.