Best Lawn Mower Leaf Vacuum Trailer

Are you searching for a fast, easy, and affordable leaf collection solution to partner with your Husqvarna or Poulan Pro lawn tractor? Look no further than the Lawn Tractor Leaf Bag with Chute Kit – the complete solution to conquer the chore of fall leaf collection. Included are all the necessary components to equip your tractor. Just install the chute on your 46-in. stamped steel deck, then mount the metal bag bracket in the two cargo mount holes (REQUIRED) in your tractor’s rear fenders. Next, slide the leaf bag over the deck chute, hang it on the bracket, and start collecting. Made in the USA, this bag provides you with 90 gallons of leaf-collection capacity. Each bag is made from durable polyester fabric that allows airflow from your mower to escape, while still withstanding your lawn’s terrain. Once full, unhook the S-hook from the metal bracket, remove the bag from the plastic deck chute, and then empty out the leaves out wherever you desire. FITS: HUSQVARNA – YTA22V46, YTH18K46, YTH22V46, POULAN PRO – PP19H46, PP20VA46, PPX19A46, PPX19H46. May work with other lawn tractors built by American Yard Products that have 46-in. stamped steel decks AND two fender cargo mount holes.

Are you tired of constantly emptying the small bags on your ride-on mower’s collection system while gathering leaves in the fall? If so, look no further than a TerraKing Leaf Bag: the fast and convenient option for increasing your ride-on mower’s leaf collection capability. Made from durable polyester-blended fabric, these bags provide you with an impressive 54 cu. ft. (43 bu.) capacity for seasons to come. Installing a Leaf Bag is simple and takes just seconds. After removing your collection system’s existing bags, simply drape the Leaf Bag’s opening over the hood, pull the debris flap over the front, and then tighten the two cord locks to secure it in place. While in use, abrasion-resistant polyester-blended fabric provides durability, but also traps dust and fine debris, while still allowing air to escape from the bag. The result? Less dust and mess while you collect your leaves. Once the bag is full, removal is just as fast and convenient as installation. After pulling up to the curb or driving to your pile, simply loosen the cord locks, remove the bag from your collection system, and then empty out the leaves. When you’re done for the season, fold the bag up and stow it away until next fall. Two Leaf Bags are available to accommodate different sizes of plastic hoods/tops found on collection systems. This version, the Standard Leaf Bag (ST95000), is designed to accommodate collection system hoods with two bags and has a maximum opening circumference of 120 in. (305 cm.). For a three-bag system, choose the XL Leaf Bag (ST95033), which has a larger 150 in. (381 cm.) opening. The capacity (54 cu. ft. (43 bu.)) is the same for both bags. Included with this purchase is one Standard Leaf Bag and one iron-on fabric patch. Brackets, chutes, and hopper tops/lids are NOT included. Please contact the dealer or store where you purchased your ride-on mower to acquire these components.

Agri-Fab attachments are designed for homeowners who want beautiful lawns yet want the job of lawn care to be quick and easy. We are dedicated to building quality and durability into the products we make. We can assure you that our products are made with the very best components to insure lasting performance. You can always be sure when purchasing an Agri-Fab product that it will provide you with years of service as well as, make your lawn beautiful and its care easy.

Promaxx Lawn Tractor Leaf Bag – Our universal bag design fits over both 2- and 3-bag collection systems and hold over 40 bushels (54 cubic feet) of leaves. That’s six times more capacity than the 6 1/2-bushel bags found on most 2-bag collection systems! How does it work? Set aside your collection system’s small bags, slide the Lawn Tractor Leaf Bag over the top of your system’s hood, and then tighten the dual drawstrings. Made from durable polyester fabric to withstand wear and tear in your lawn, these bags also allow airflow from your mower to escape. When the bag is full, unattach it and then lift it up to easily dump the leaves out. Material collection system/grass catcher is NOT included with your Lawn Tractor Leaf Bag.

For more than a decade, Lawn Tractor Leaf Bags have been making fall leaf collection easier for customers. Proudly made in the USA, our universal bag design fits over both 2- and 3-bag collection systems and hold over 40 bushels (54 cubic feet) of leaves. That’s six times more capacity than the 6 1/2-bushel bags found on most 2-bag collection systems! How does it work? Set aside your collection system’s small bags, slide the Lawn Tractor Leaf Bag over the top of your system’s hood, and then tighten the dual drawstrings. Made from durable polyester fabric to withstand wear and tear in your lawn, these bags also allow airflow from your mower to escape. When the bag is full, unattach it and then lift it up to easily dump the leaves out. Material collection system/grass catcher is NOT included with your Lawn Tractor Leaf Bag.

Are you searching for a fast, easy, and affordable leaf collection solution to partner with your John Deere Lawn Tractor with a 42- or 48-inch Edge deck? Look no further than the 90 gallon Lawn Tractor Leaf Bag with Chute Kit – the complete solution to conquer the chore of fall leaf collection. How does it work? Included are all the necessary components and hardware to equip your tractor. Simply install the plastic chute on your 42- or 48-inch Edge deck, bolt the metal bag bracket to the cargo mount holes in your tractor’s rear fender, and install the bag guide that prevents the bag from interfering with the tire. Then, slide the bag over the plastic deck chute, hang it on the metal bracket, and start collecting. Made in the USA, this Lawn Tractor Leaf Bag provides you with 90 gallons of leaf-collection capacity. The bag is made from durable polyester fabric that allows airflow from your mower to escape, while still withstanding your lawn’s terrain. Once full, unhook the s-hook from the metal bracket, remove the bag from the plastic deck chute, and then empty the leaves out wherever you desire. FITS: JOHN DEERE lawn tractors with 42-inch Edge decks – E100, E110, E120, E130, D100, D110, D120, D130, LA100, LA105, LA110, LA115, LA120, LA125, LA135, S240, JOHN DEERE lawn tractors with 48-inch Edge decks – E140, E150, E160, E170, D140, DD150, D155, D160, LA130, LA145, LA140, LA165

Agri-Fab attachments are designed for homeowners who want beautiful lawns yet want the job of lawn care to be quick and easy. We are dedicated to building quality and durability into the products we make. We can assure you that our products are made with the very best components to insure lasting performance. You can always be sure when purchasing an Agri-Fab product that it will provide you with years of service as well as, make your lawn beautiful and its care easy.

Works with lawn/garden tractors and ATV’s.Ideal FOR picking-up leaves, grass clippings, twigs and more.Easily dumps debris from drivers seat.Rust resistant powder coat finish.

Ideal for lawn clippings, leaves, twigs and more, our 42 inch Tow Behind Lawn Sweeper deals easily with most lawn debris, leaving your lawn clean and clear. Featuring a 12.9 cubic foot nylon hopper, ten inch brush diameter and a 42 inch clearing width, our lawn sweepers are treated with rust-resistant powder coat finish and can tackle variable terrain with ten and a half inch rubber wheels. Attaching quickly to any ATV, UTV or garden tractor with a muti-hitch connection, Yard Commander’s clever industrial design allows for easy dumping of debris, saving you time and energy while leaving your yard looking stellar. The attractive cross brush design and collapsible hopper bag tucks away for easy storage. The 42” sweeper has a 9 position height adjustment, and comes with a blister card hardware pack, and foldable tongue with multi-hitch for easy attachment.

Hopper Capacity: 12.9 CU. FT.

Brush Diameter: 10″(254MM)

Clearing Width: 42″(1066MM)

Rubber Wheel: 10-1/2″x2-3/8″(266×60.3MM)

Package Size: 50.8″x16.9″x13″/129x43x33CM

Net/Gross Weight: 72.75/78.7LB(33/35.7KGS)

The YTF-38STQA 38″ quick assembly lawn sweeper by Yard Tuff is the perfect solution to all of your lawn chores. Yd Tuff’s sweeper is the ideal tool for removing debris such as leaves, pine needles, twigs, grass clippings, litter, & so much more. Assembles quickly & easily! yd Tuff’s sweeper has a universal pin-style hitch with leveling spacers to allow you to easily attach this sweeper to your ATV or lawn tractor to make the most of the tow-style sweeper. This sweeper has a 38″ wide sweeping path to help you get the job done faster. The durable, mesh bag measures 41″ x 29″ x 22″ & has a capacity of 12.5 cubic’., allowing you to Complete large jobs without hassle. Constructed of 4 brushes, this sweeper has a sweep ratio of 4: 1 for an efficient tool. The anti-slip brush height adjustment gives you great versatility & convenience, especially as the unique quick lever height adjustment handle can be operated from your ATV or lawn tractor. To add even more convenience, dumping your load can even be done from the seat of your ATV or lawn tractor! with a steel construction & a powder-coat finish, this sweeper is durable & reliable for a tough product that you can count on. The solid, poly tires measure 10″ in diameter & add to the reliability of this product. Yd Tuff’s quick assemble sweeper folds up easily for compact storage. 1 year limited manufacturer’s parts warranty.