Best Vacuum Tube Amplifier For Turntable
Nowadays, there are so many products of vacuum tube amplifier for turntable in the market and you are wondering to choose a best one.You have searched for vacuum tube amplifier for turntable in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings vacuum tube amplifier for turntable which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
T20 Bluetooth Tube Amplifier Stereo Receiver 2 Channel Class D Digital Mini Hi-Fi Power Amp Preamp Compact Integrated Headphone Amplifier for Home Passive Speakers with 6J4 Vacuum tubes + Power Supply
- This Class A single-ended vacuum tube amplifier adopts hand welding to ensure the true reality of the sound quality. This version has headphone output, which suits for 32Ω-600Ω impedance all kinds of headphones. The toggle on the front panel is to switch between speaker and headphones. Please connect your speakers (both 4Ω and 8Ω) to 8Ω and 0Ω posts.
- This amplifier adopts transformer parallel output to reduce its internal resistance by half and achieve doubled improvement on its power.
Nobsound 6P1 6.8W 2 Vacuum Tube Power Amplifier; Stereo Class A Single-Ended Audio Amp Headphone Amplifier Handcrafted (with Headphone Amp Function)
- Vacuum tube power amplifier with Bluetooth, 3.5mm jack and Stereo L/R RCA input
- Power amplifier uses TPA3116 as the core chip, 1.2MHZ modulation frequency, high-power output distortion of less than 0.1% (10W), up to 50W + 50W dual-channel output power
- Audio signal input can be computer, CD, phone and lossless player, or use bluetooth function to connect Phone and Tablet PC
- Easily switching between different sound sources with its audio input selection
Notice:
The toggle on the front panel is to switch between speaker and headphones. Please connect your speakers (both 4Ω and 8Ω) to 8Ω and 0Ω posts.
Specifications:
- Output power: 6.8W * 2
- Frequency response: 20Hz-20KHz
- Input impedance: 100K ohms
- Output impedance: 4/8Ω
- SNR: 90db
- Input Sensitivity: 500mv-2000mv
- Harmonic distortion: 1% (1KHz)
- Tube: 5Z4P * 1 6H8C * 2 6P1 * 4
- Operating voltage: 110V
- Weight: about 7 kg
- Size: 260mm * 215mm(including terminals and knobs 260mm) * 150mm (W*D*H)
Package includes:
- Finished tube amplifier ×1
- Power cable ×1
Nobsound Bluetooth Vacuum Tube Power Amplifier Class D HiFi Digital Audio Amp 100W (50W×2) (Black)
- ► Patent power conversion module. No background noise.It cannot be used for turntables.Can not be used with headphones.
- ► All aluminum alloy shell, heavy gold PCB, gold-plated interface. Mini Size hifi amplifier preamplifier, exquisite desktop decorations.
- ► Using classical tube 6j1 design and optimize the route.Unique high bass adjustment
- Tube can be replaced design,soft voice.
- ► Can match digital power amplifier analog power amplifier,active speakers.Can match digital power amplifier analog power amplifier,active speakers.Patent power conversion module.
Troubleshooting:
Some customers may find the Bluetooth can’t be connected or found. Here is the solution.
1. Power off the M8 and your phone.
2. Wait for 5s and then power on both.
3. If it still can’t be discovered, repeat 1 and 2 and it should work.
If the problem can’t be solved, please contact us at [email protected]
Specifications:
- Tube: 6J2
- Amplifier Chip: TPA3116
- Rated output power: 2*30W /8Ω, 2*50W /4Ω
- Audio input: 1 set of RCA input; 1 * 3.5mm stereo input; 1 * Bluetooth input
- Audio output: 1 set of Banana Speaker Jacks
- Signal to noise ratio: >99dB
- Frequency: 50Hz-60Hz
- Dimensions: 16*11.5*7 cm (including tube height)
- Power supply: universal DC 19V 4.7A
Packing List:
- 1 * Power Amplifier
- 1 * Power supply
- 3 * 6J2 tube (one spare tube)
- 1 * Bluetooth antenna
Troubleshooting:
For noise issue:
- There is a large probability that the low-quality audio cable causes the static noise.
- Please make sure the sound source is fine since tube amplifiers will amplify all sound including the noise.
- Please check whether the tubes are plugged well on the tube sockets or not.
- Devices like routers, mobile phones will also interfere in the audio signal and may cause static noise.
- If your problem can’t be solved, please feel free to contact us. We will be very glad to help you and try our best to make you satisfied.
Dilvpoetry TUBE-01 Preamp 6J1 Vacuum Tube Amplifier Buffer Mini HiFi Preamplifier DC12V2A (Silver)
- 🍎 NOTE: This is a preamplifier, not a power amplifier or phono preamp, can't be used for turntables or passive speakers.
- RCA input to the computer, CD, phone, iPod and other player and RCA output to the digital amplifiers, active multimedia audio devices for lossless audio(The RCA cables not included).
- Small compact design, with optimal integrated circuit to get powerful, dynamic and sweet sound. Tubes can be replaced by 6K4,6AK5,EF95, 5654,403B tubes.
Fosi Audio P1 Tube Pre-Amplifier Mini Hi-Fi Stereo Buffer Preamp 6K4 Valve & Vacuum Pre-amp with Treble & Bass Tone Control for Home Theater System
- This Class A single-ended vacuum tube amplifier adopts hand welding to ensure the true reality of the sound quality (with headphone amp function ASIN: B076CC92BX).
- This amplifier adopts transformer parallel output to reduce its internal resistance by half and achieve doubled improvement on its power.
- Using antimagnetic transformer covers to shield current interference and achieve much lower static noise.
Nobsound 6P1 6.8W x 2 Vacuum Tube Power Amplifier; Stereo Class A Single-Ended Audio Amp Handcrafted
- MC-13S is the latest upgraded version of MC-10L. It is powered by Yaquina 6CA7T tubes which are better than Shu Gang EL34B in sound quality
- An analog VU meter on the front panel to monitor the average of the two channel output levels
- Class A push-pull power amplifier to reduce distortion
- Ultra linear push-pull amplifier provides greater output power
- Caution: The product don't have plastic cover. To protected the amp, tube and machine are packed individually.
YAQIN MC-13S Push-Pull Integrated Stereo Tube Amplifier(Without Protect Cover)
- Using classical tube 6j4 design and optimize the route
- Tube can be replaced design,soft voice.Adopt the Dual run amplifier chip NE5532 power conversion module.Adopt TPA3116D2 Amplifier chip,Bluetooth 4.2 CSR64215 chip and HT97220 Chip
- The power circuit is completely separate from the audio circuit ,in order to Minimize interference
- DC12V-24V power supply,Frequency Response is 20Hz-20kHz(±3dB),All aluminum alloy shell,heavy gold PCB,gold-plated RCA interface and Bluetooth Audio input,Control ways:Potentiometer knob and Toggle switch,3.5mm headphone jack
Caution : the product don’t have plastic cover. Please click:http://www.amazon.com/dp/B00A7IZN70 to buy the one with plastic cover
Specification
Output Power:40W + 40W (8ohm)
Frequency Response:10Hz — 60kHz (±2dB)
Signal/Noise Ratio: ≥85dB (A)
Load impedance: 8ohm or 4ohm
Distortion:≤0.9%(28W)
Maximum Power Consumption:220W
Sensitivity:≤0.26V
Tubes: 6CA7T x 4 12AX7B x 2 12AU7 x 2
AIYIMA 6J4 Tube Amp Amplificador,Bluetooth 4.2 TPA3116D2 Power Digital Home Audio Amplifiers 50Wx2 HiFi Stereo Vacuum Tube Amplifier with Treble Bass Adjustment (6J4-Silver)
- [3 in 1]: Headphone amp + Pre-amp + External USB DAC sound card
- With 3.5mm and USB(tybe b) input jacks
- [Low Ground Noise]: Adopt low-ground noise power circuit, No pop, no audible noise, dead silent when nothing is playing through it.Come with 2 X 6J9 J-Grade Tubes, can be replaced by E180F, 6ж9П, EF861, and 6688 tubes
- [Small Compact]: Small Simple compact design but practical. Built-in PCM2704 DAC chip, Support sampling rate: 16Bit - 32k, 44.1k, 48k. Come with USB cable, can be used as external USB DAC.
Headphone Amplifier Vacuum Tube Preamplifier USB Sound Card PCM2704 DAC Integrated Mini Audio Hi-Fi Stereo Preamp P3 Updated Version Fosi Audio
- Little Bear T11 is a pure tube phono preamplifier working with MM cartridge turntables only. Please make sure your turntable is equipped with a PHONO signal output instead of a LINE output.
- Little Bear T11 is based on T10 with improvement. Compared to T10, T11 has lower background noise at normal volume. Its sound performance is better with increased liveness.
- Adopting a conventional active RIAA equalization phono stage circuit. There is 3 metal covers and 4 acrylic covers for those tubes. And you will be able to choose which type as you like.
Nobsound Little Bear T11 6N2/12AX7 Vacuum&Valve Tube Phono Turntable Preamplifier; MM RIAA LP Vinyl Record Player Preamp; Stereo HiFi Audio Pre-Amplifier
- 6J1 tube buffer design: This vacuum tube preamplifier uses the classic 6J1 tube, the sound is fine and transparent, natural and warm, and can be replaced with EF95, GE5654, Philips antiques5654, The Soviet6ж1n-EB, 6K4 according to different sound styles.
- Tube Preamplifier Chipsets: The chip adopts NE5532P high performance dual op amp, the output distortion is less than 0.3%, the tone is warm, the fidelity is high, and the noise is low.