Best Diy Manual Vacuum Pump

Including 4 tubes
4mm×39 inches
6mm×39 inches
8mm×37.7 inches
10mm×39.4 inches

How To Use bacoeng 7L Oil Extractor?
1) Warm up the oil by running the engine. This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can’t hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit.
2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube.
3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.
4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump as in the photo and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot.

Note: 1.No special cleaning is required on the unit. Just empty as much oil as possible (do not store oil long term).
2.Not for use on gasoline or other flammables.

Extracts all kinds of fluids including engine oil ect. Requires just 4 to 10 strokes in a row to create a powerful vacuum. The integrated container (6.5 liters) neatly captures the oil preventing messy spills. Since it is see-through and calibrated, it lets the user know how much oil has been extracted. A built-in float switch automatically stops extraction as soon as capacity is reached. A pour spout facilitates emptying. With the pump housed inside the container, the BACOENG OIL EXTRACTOR is a durable, maintenance free unit. Stiffening ribs for added durability. Wide base for stability. It is ideal for professional use.

Product Description

Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil. The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for boats, cars, trucks and more. USA dimensions: 16 inch length x 7 inch width x 11 inch height, tank size: 8 gallon, suction hose length 48 inches.

Amazon.com

Changing engine oil can be messy, time consuming and it is difficult to dispose of old oil. The LiquiVac is a user friendly and an environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, open the cap’s valve and LiquiVac extracts the oil directly into its plastic holding tank. It works great for boats, cars, trucks–and small engines too.

Quickly change the oil in large engines–works with small engines too

Cars and Trucks Oil Change

The LiquiVac Oil Changing System for Large Projects and Engines makes car oil changes quick, clean, and easy. This is especially true with hard to access drain plugs found in large engines.

An average car or truck takes approximately 8-10 minutes to extract the oil, and without a mess. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes of boats, cars, and light trucks. Plus, its tank has an 8 quart capacity allowing the user to make multiple oil changes of small engines too.

Boats

The LiquiVac innovative design makes it easier to change the oil in engines such as boats with inaccessible drain plugs. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes to make your 4-cycle outboard oil change and inboard oil change easy. Also, don’t forget the LiquiVac makes boat transmission changes very easy.

Small Engines: Lawnmowers, Generators, Power Washers, Snow Throwers, and More

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil and, eventually, engine breakdowns.

With the LiquiVac small engine oil changes are a snap. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines super simple.

Which Model of LiquiVac Is Right for You?

LiquiVac Small Engine Model

Small Engine Model

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.

But, now there’s a simple, fast and clean way to change your lawn and garden equipment’s oil. It’s the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle. Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as.

LiquiVac Large Project/Engine Model

Large Project/Engine Model

It is called the Large Project/Engine Model for a reason. Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. They can do it fast, without the mess. Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too.

Package included:
1 x Valve kit;
1 x Plastic container;
1 x Silicone gel hose;
1 x Air spread valve;
2 x Hook;
2 x Joint;

Specification:
Hose length: 6.5ft
Plastic container: 500ml
Air pressure: 20psi≤P≤120psi
Air inlet: 1/4″ quick coupler male plug

Notice:
The volume of the bottle is 500ml. If you want to extract more than 500ml of liquid. You should release the liquid before the bottle is filled, Then repeat the extraction step, To avoid sewage splashing out or valve being blocked.

Enjoy powerful cooling and heating with this efficient mini split air conditioner. The LETO Series by Senville offers affordability and is great for most applications, including single rooms, additions, garages, restaurants and more. This compact mini split provides heating and cooling up to 5F/-15C, powered by a GMCC Toshiba compressor. The LETO Series by Senville is backed by a 1 Year (Parts)/5 Year (Compressor) Manufacturer’s Warranty.

The Kozyvacu&#174 TA500 has been performance and relibility tested to meet Kozyvacu’s high standards. Its power and capacity meets for a wide range of service applications, it delivers a high CFM rating for fast thorough evacuation.

Features:

• High torque design for easy startup and efficient operation; and a Die-Cast Aluminum Housing – Cast aluminum housings make the pumps lightweight while durable. it is easy to start and maintenance free.
• Thermally protected motor to make it durable for long time duty.
• Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining;
• Oil Fill Port – Makes adding oil simple since the port is accessible from the front or either side.
• The sight glass on the front of the pump shows you when enough oil has been added;
• High Efficiency and Low Noise
• ON/OFF Switch Non Slip Cushion Handle
• Foam molded packing for safe transportion.

Specification:

• Free Air Displacement(FAD): 5.0CFM
• Power: 1/2 HP
• Stage: 2
• Voltage/Frequency: 120V/60HZ
• Ultimate Vacuum: 0.3 PA, 25 microns
• 1/4 inch flare female x 1/2 inch Acme male
• Oil Reservoir Capacity: 380ML

Dimension and Weight:

• Net dimension and weight is 12.6×5.3×9.2 inches, 19.0pounds,
• Shipping dimension and weight is 14.2×7.1×11.4 inches, 21.0pounds

Package Included:

• 1 x Kozyvacu TA 500 Vacuum Pump
• 1 x 380ml White Oil Bottle Filled With Oil.
• 1 x User Manual