Top 10 X10 Home Power Switch

Control up to 8 different groups of X10 compatible receivers (lamp and appliance modules wall switches and universal modules)Dim/bright control and an all-lights-on/all-lights-off buttonCompact design

Create both local and X10 remote control for a wired device with the X10 Appliance Switch. The switch supports incandescent, fluorescent, appliance, or motor loads. It can serve as a standalone switch or as the master switch in a 3- or 4-way application. A LED indicates the switch’s on/off status. FEATURES: Rated for loads up to 1800 Watts, 1/2 HP. Responds to ALL LIGHTS ON command. Compatible with X10 Companion Wall Switch. Includes both White and Ivory paddle covers. CONTENTS: X10 Appliance Switch, White Paddle Switch Cover, Ivory Paddle Switch Cover. NOTES: Wallplate not included. Neutral wire required for inductive loads. SPECS: AC Voltage: 120 VAC, 60 Hz. Load Rating: 1800 Watts, 1/2 HP, 20 Amps. Dimmable: No. Connection Requirement: Neutral Wire. Certifications: UL listed, CSA approved.

X10 started manufacturing home automation and security products in the late 70s and has been one of the smart home standards since its inception. X10 utilized powerline language to transmit control signals anywhere in your house over your existing 110V electrical lines so you can control lights and appliances throughout your home without running new wires Simply add a controller transmitter at one electrical outlet and add another module receiver at any other outlet and you have remote control of that module. Choose from plug-in wired-in and wireless models. This enables you to have the remote and automated control of lights and appliances from anywhere on your property. The convenience and security of controlling all your lights and appliances from anywhere in your house is simple and inexpensive.Features. Rated up to 20A 220VAC loads. Plug In device. Color White

Whether your recessed and out-of-the-way home fixtures give your home stylish environmental lighting, or illuminate important areas and work spaces, you can control these lights with your X10 system and the XPDF X10 Pro Inline Dimmable Receiver Module. Now even ambiance lighting and canned fixtures can respond to the On/Off, All Lights On, Dim, Brighten, and All Units Off commands.This small module receives signals from your X10 system through your existing home wiring, via plug-in controllers and radio frequency wireless X10 remotes, like the HR12A X10 PalmPad Wireless Remote Control Module. Softly and discretely light any room by remote control and set just the mood you’re looking for with a controller you can keep in your pocket.Or, shut off all your house lights with a handy PMC01 X10 Pro Plug-in Mini Controller in the bedroom or kitchen, and avoid the hassle of locating every light switch at bedtime. You can save on your energy bills and stubbed toes when switching off lights is this convenient.There’s no need to come home and stumble around a dark house with your hands full, in search of a light switch. With the KR19A Wireless Keychain Remote, switch on your house lights before you’re even in the door. No more fumbling, just instant lighting when you need it.The X10 system gives you an easy modern means of controlling all your home lights and appliances with modules that function with a variety of motion sensors and timers, like the XTMT4 X10 Pro LCD 64-Event Mini Timer. Give your house the appearance of someone at home when your awaywith programed lights and appliances.

This is the Push Button Style X10 Relay Wall Switch! This fits in a normal toggle style wall plate and has a convenient LED system to let you know if the unit is on or off and will also help you find the switch in complete darkness! This is a relay wall switch and will work with all Lighting including Incandescent, LED, Halogen, Fluorescent and more! Installation and Operation are simple. Simply install in existing switches location (requires a Neutral wire), set the dial to the housecode you want to give the unit and operate with your favorite X10 controller! The unit is rated at 120 Volts 10 Amps / 1000 Watts. The unit has been designed to have a better construction and feel than previous switches, while also providing additional, useful features like the LED night light to help you locate the switch in the dark!

Plug-in module allows control of appliances/lamps from anywhere in the house using any X10 controllerWorks with fans air conditioners coffee pots stereos TVs and lampsCompatible 15A 1/3 HP and 500-watt appliances

With the addition of one or more WS14A Companion Switches the WS12A X10 Decorator Dimmer Switch Module can be expanded to work with 3-way and 4-way switches. The WS12A X10 Decorator Dimmer Switch Module connects like any standard switch and uses your own switch plate, or one that may be easily purchased at any local hardware or big box store.The WS12A Switch functions as a local dimmer and on/off switch. Simply maintain pressure on the bottom of the paddle to dim lights, release and press again to brighten. There is need to dim completely before brightening the light. And with Resume Dimming, your lights will remember the level they were previously dimmed to, brightening to that level on their next use. With the simple and accessible X10 wall switch anyone in your home can control your fixtures locally. With an X10 remote, like the HR12A PalmPad Remote Control, the WS12A Switch responds to the All Lights On and All Units Off commands, and allows you to remotely dim and brighten incandescent bulbs via X10 wireless remotes and plug-in controllers, like the X10 SC503 Maxi Controller.Please be aware that the WS12A X10 Decorator Dimmer Switch Module only works with incandescent bulbs, and will not work properly with other bulbs, such as compact fluorescents. The XPS3 Decorator Light Switch work well with other bulbs and allow you to include all your wired fixtures on your X10 system. Check out the X10 Pro line for the next level of X10 modules. The XPD3 X10 Pro Switch is functionally the same as the WS12A Switch, but because it is manufactured under a higher standard it is verified by Underwriters Laboratory, Federal Communications Commission, Industry Canada and Canadian Standards Association.

The XPS4 is the NEW VERSION of the XPS3! It has been updated and upgraded! Use this relay switch for any sort of appliances, fans, or lighting. Works great with the newer alternative lighting (incandescent, halogen, LED, etc). This is a 20 Amp switch and it can handle most 120v appliances. It does require a neutral wire. This switch is built with a new, more reliable relay. It is also almost silent! The older XPS3 switch had a very audible noise when turning on and off, no longer! The switch also has AGC (automatic gain control). What this means for you is a more reliable X10 experience as the AGC will weed out some of the line noise directly surrounding the switch. This switch also houses our Night Light feature. This makes the switch ultra easy to find at night and gives the switch a very classy look! We have made sure to not make it too bright, just a simple glow that will assist you in locating the light during the darkest of nights.

What makes this switch unique is that in addition to dimming lights, the DIM/BRIGHT feature also lets you adjust the speed of ceiling fans and other motor-controlled devices in up to 16 steps. Now when the temperature in the room goes up (or down), you can adjust the speed of your ceiling fan from any X10 transmitter without getting up from your seat.The Inductive Wall Dimmer Switch is ready for three or four-way circuits. A 3-way circuit requires one Inductive Dimmer Switch and one slave switch. A 4-way circuit would require a total of two 2 slave switches. Simply add additional slave switches for 5, 6 or more way circuits. For single pole applications, just cap off the red traveler wire. Please note that you must use the PRO Series slave switches, existing 3 or 4 way mechanical switches will damage the dimmer.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy X10 Home Power Switch, eg:

• What are Top 10 X10 Home Power Switch for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 X10 Home Power Switch to buy?
• What are Top Rated X10 Home Power Switch to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) X10 Home Power Switch?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for X10 Home Power Switch.
• Before deciding to buy any X10 Home Power Switch, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose X10 Home Power Switch and What you should consider when buying the X10 Home Power Switch and Where to Buy or Purchase the X10 Home Power Switch. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 X10 Home Power Switch of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about X10 Home Power Switch.