Best Canavac Central Vacuum Systems
Best results for canavac central vacuum systems
Allegro MU4500 Champion – 6,000 Square Foot Home Central Vacuum System 35 Foot Electric Hose
$51.42
$68.39
Last update was on: November 23, 2024 10:45 pm
- Standard adapter Inlet installation kit to update or install with any central vacuum system utilizing patented 2 x 2 adapters to connect to regular PVC piping
- 2 x 2 adapters create a seamless connection between central vacuum sized fittings and standard PVC pipes, allowing you to purchase inexpensive and readily available plumbing PVC for your installation
- White, 3 in. X 5 in. Tall non-electric Inlet features a sleek, spring-loaded door for a discreet design
Cen-Tec Systems 92817 4 Inlet Central Vacuum Installation Kit, White
$349.99
$507.49
Last update was on: November 23, 2024 10:45 pm
- Central vacuum package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the nozzle from the hose handle
- The 14Wide power nozzle has a chevron agitator design shown to provide superior cleaning performance
- Compatible with all major brands of central vacuums including beam, Electrolux, eureka, vacumaid, vacuflo, nutone, cyclovac, canavac, husky, star power, md, and imperium
Cen-Tec Systems 92927 Central Vacuum Power Nozzle Kit
$419.99
$466.19
Last update was on: November 23, 2024 10:45 pm
- Direct connect hose end is compatible major brands of central vacuums which are installed with direct connect dual voltage wall inlets
- 35 foot crush proof total control hose lets you control both the central vacuum power unit and the power nozzle independently or together
- The CT25QD power nozzle is designed to effectively clean traditional carpets as well as today's new soft fiber carpets equally well. The CT25 has a unique venting system that insures optimal air flow
Cen-Tec Systems 93015 Central Vacuum Electric Kit with CT25, CT10, and 35 Foot Direct Connect Hose
$109.00
$136.25
Last update was on: November 23, 2024 10:45 pm
- Air Turbine Central Vacuum Powerhead
- No Batteries or additional power needed - runs off your Central Vacuum
- The make-up of the Turbo Cat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Two Year manufacturer's warranty - instruction manual care & maintenance included
TurboCat Air Driven performance Brush for all Central Vacuums (Gray)
$42.99
$55.89
Last update was on: November 23, 2024 10:45 pm
- Designed to work with both conventional and electric hoses that have a button lock stub tube to engage the chrome telescopic wand included in the set. The wand features Cen-Tec’s exclusive button down feature that makes it easier to disengage the hose from the wand for above the floor cleaning and storage
- Includes a 12” pivoting neck natural fill floor brush in pearl gray. The brush is designed for use on all hard floor surfaces including hardwood, laminate, tile, stone, concrete, vinyl, and linoleum
Cen-Tec Systems 93785 Premium Vacuum Attachment Kit with Telescoping Wand, Gray
$14.95
$20.78
Last update was on: November 23, 2024 10:45 pm
- 5 Central Vacuum System Short 90 spigot
- Use with Standard 2" Built in Central Vacuum Pipe
- Designed to prevent clog
- Fits: -PowerStar Pullman Riccar Simplicity Vacuflo Vacumaid Valet WalVac
- All ZVac Central Vacuum Fittings Meet ASTM 2158 Standards
ZVac 5 Central Vacuum Cleaner Short 90 Fittings for All Central Vacuum Systems Including: Electrolux Eureka Filtex Frigidaire Hayden Honeywell Imperium MD Nadair Nutone (5, Short 90)
$159.99
$228.79
Last update was on: November 23, 2024 10:45 pm
- Includes a 1.375” x 35 foot pearl gray low volt hose providing on off control of the central vacuum from the 360 degree swivel handle
- The hose is a soft crown, lightweight crushproof construction that resists kinking and won’t mark furnishings or floors. The wall end is designed to be compatible with industry standard wall inlets with split low voltage contacts
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, hoover, cyclovac, vacuflo, vacumaid, md, m&s, husky, canavac, Honeywell, and well as most regional brands
Cen-Tec Systems 93642 Central Vacuum Low Voltage Kit 35 Ft. Hose Light Gray
$101.91
$127.39
Last update was on: November 23, 2024 10:45 pm
- No Batteries or additional power needed
- Runs off your Central Vacuum
- The make-up of the TurboCat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- This model is gray in color
Cen-Tec Systems Vacuflo Turbocat Central Vacuum Air Turbine Brush, Gray
$169.99
$202.29
Last update was on: November 23, 2024 10:45 pm
- Suitable for use with all major brands of central vacuums, including: Beam, Electrolux, Eureka, VacuMaid, Vacu-flo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium with a flush mount hose
- Includes wand release, wrap around bumper, headlight, reset button and a height adjustment
- Quiet Drive poly-v belt is always in contact, which results in a dual brushed edge cleaning so no dirt escapes
- Can be used to replace a Nutone CT600
Cen-Tec Systems 94775 CT20QD Quiet Drive Central Vacuum Nozzle with Integrated Wand, Black
$189.95
$233.64
Last update was on: November 23, 2024 10:45 pm
- This central vacuum install kit has 88ft of pipe! Most all you will need for a weekend warrior! Our Central vacuum installation kit with all fittings and pipe by ZVac (Excluding the CVAC attachments and central vacuum main power unit)
- Top quality central vacuum pipe fittings all are developed and made in North America by GoVacuum and The ZVac central vacuum engineers of Chantilly, Virginia in America! Will work with most low voltage hoses and central vacuum accessories.
ZVac Compatible Installation Kit Replacement for All Central Vacuum Accessories 3 Inlets & 88 feet of Pipe Fits All Brands
$149.95
$188.94
Last update was on: November 23, 2024 10:45 pm
- This central vacuum install kit has 68ft of pipe fittings! Most all you will need for a DIY central vacuum installation kit with all fittings and pipe by ZVac (Excluding the CVAC attachments and central vacuum main power unit)
- Top quality central vacuum accessories and installation parts includes pipe, fittings & central vacuum wall plates - all are developed and made in North America by The ZVac central vacuum engineers of Chantilly, Virginia in America!
ZVac Compatible Installation Kit Replacement for All Central Vacuum Includes 68ft Pipe for Nutone, Beam, Eureka, Vacuflo, Vacumaid, Hayden, Broan, Electrolux, Honeywell, Canavac, Riccar, Cyclovac
$120.85
$167.98
Last update was on: November 23, 2024 10:45 pm
- Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: Beam, Electrolux, Vacuflo, Vacumaid, Nutone, Hayden, MD, Canavac, Cyclovac, and Imperium
- The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces. Ideal for area rugs and areas of the home where transitions from carpet to hard floor are typical. The second nozzle is a premium 12” USA produced hard floor brush with natural horsehair fill ideal for delicate floor surfaces
Cen-Tec Systems 92718 Attachment Kit
$117.99
$132.15
Last update was on: November 23, 2024 10:45 pm
- 1.375” x 35 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
Cen-Tec Systems 94093 35 Ft. Low Voltage Central Vacuum Installed Hose Sock, Light Gray
$77.59
$113.28
Last update was on: November 23, 2024 10:45 pm
- General purpose vacuum accessory package is designed to provide a Basic set of cleaning attachments to support the aeon cu utility vacuum
- Features a 50 ft. Orange commercial grade vacuum hose with both an end fitting that will utilize the utility outlet on the vacuum or to activate the system through a remote work station Inlet valve
- The high visibility crush proof commercial hose features a unique flexible Strain relief at both ends of the hose to help preserve hose Life by eliminating kinking in the typical hose
Cen-Tec Systems 92872 Accessory Package for Utility Vacuums
$72.74
$91.65
Last update was on: November 23, 2024 10:45 pm
- Features a commercial grade 1.25X 35 foot vacuum hose with the trademarked arc relax strain relief to increase hose life by preventing kinking
- Includes a premium Gray rug and hard floor combination tool with wheels to insure easy movement on carpeted surfaces and area rugs
- Includes a white hose hanger with a unique non-slip blade to keep the hose on the hanger
- Compatible with all major central vacuum brands including, beam, electrolux, eureka, vacuflo, vacumaid, md, aerus, cyclovac, canavac, honeywell, vacuflo, and imperium
Cen-Tec Systems 93367 Central Vacuum Attachment Kit Gray
$106.99
$126.25
Last update was on: November 23, 2024 10:45 pm
- 1.375” x 40 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue. The hose is highly flexible and has a soft surface with rounded corrugations to avoid damage to household furnishings without the need for a hose sock
Cen-Tec Systems 91353 Central Vacuum Hose, 40 Ft, Light Gray
$24.35
$33.60
Last update was on: November 23, 2024 10:45 pm
- Compatible with major brands of central vacuum, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vacuum
- Compatible with all standard backpack vacuums and dry canister vacuums
- The 34498 chrome telescopic wand works with almost any vacuum variety and it's versatile nature makes it a must have for any operator
- Telescopes from 23.5 Inches to 39 Inches, aiding operators to reach far beyond a standard vacuum wand
Cen-Tec Systems 34498 Telescopic Wand Vacuum Wand, Nylon Ring Collar, Chromed Steel, No Button
$28.47
$31.60
Last update was on: November 23, 2024 10:45 pm
- The 12” 37737 is designed for silent movement on hard floor with a wrap around nylon brush and low noise wheel. The brush is retracted using and on the tool rocker switch and then is suitable for all carpeted surfaces. The 1 ¼” neck of the tool double pivots to follow you through the vacuuming motion keeping the face of the tool at the ideal angle to insure cleaning performance.
- The stainless base plate has deep channels to the tool edge to insure excellent edge cleaning and maximum air flow for capturing debris. Two lint strips in front of and behind an oversized channel capture lint and fibers from the carpets surface and help direct them into the air stream.
Cen-Tec Systems 37737 12" Combination Hard Floor and Carpet Vacuum Nozzle
$497.54
$641.83
Last update was on: November 23, 2024 10:45 pm
- Includes both the Ct10 and Ct23 electric nozzles
- Premier accessory kit in Cen-Tec Systems' line
- Compatible with major brands of central vac, including beam, no one, Electrolux, hayden, vacumaid, aggressor, vacuflo, md, canavac, cyclovac, air vac
- Includes a 35 foot 4-wire Cen-Tec Systems pigtail electric hose with hose sock
- This package will clean your entire home across all surfaces weight: 23.5 lbs