Best Car Electric Vacuum Pump

Dorman offers 100 percent new mechanical vacuum pumps. Radial ball bearing design provides greater load capacity for improved durability. The unit creates vacuum to operate various accessories throughout the vehicle.

The Kozyvacu&#174 TA500 has been performance and relibility tested to meet Kozyvacu’s high standards. Its power and capacity meets for a wide range of service applications, it delivers a high CFM rating for fast thorough evacuation.

Features:

• High torque design for easy startup and efficient operation; and a Die-Cast Aluminum Housing – Cast aluminum housings make the pumps lightweight while durable. it is easy to start and maintenance free.
• Thermally protected motor to make it durable for long time duty.
• Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining;
• Oil Fill Port – Makes adding oil simple since the port is accessible from the front or either side.
• The sight glass on the front of the pump shows you when enough oil has been added;
• High Efficiency and Low Noise
• ON/OFF Switch Non Slip Cushion Handle
• Foam molded packing for safe transportion.

Specification:

• Free Air Displacement(FAD): 5.0CFM
• Power: 1/2 HP
• Stage: 2
• Voltage/Frequency: 120V/60HZ
• Ultimate Vacuum: 0.3 PA, 25 microns
• 1/4 inch flare female x 1/2 inch Acme male
• Oil Reservoir Capacity: 380ML

Dimension and Weight:

• Net dimension and weight is 12.6×5.3×9.2 inches, 19.0pounds,
• Shipping dimension and weight is 14.2×7.1×11.4 inches, 21.0pounds

Package Included:

• 1 x Kozyvacu TA 500 Vacuum Pump
• 1 x 380ml White Oil Bottle Filled With Oil.
• 1 x User Manual

The NewPosition product –Vacuum Pump – has brought together in here, to meets for a wide range of service applications like refrigeration equipment maintenance,vacuum packing,medical equipment and so on.

★Good Customer Service:
Online response within 24 hours,if you want to learn more about the vacuum pump,please contact us,the professional team is always ready to serve you.

★Specification:
●Free Air Displacement:4.0 CFM
●Power:1/3 HP
●Voltage/Frequency : 110 V/60 Hz
●Ultimate Vacuum :5 PA
●Oil Capacity :225 ml

★Features:
●Powerful Core:Strong copper motor,stable operation,low heating temperature,low resistivity,low energy consumption——ensures the efficient operation of vacuum pumps
●Intelligent Heat Elimination Fan:when there is foreign matter,it will make self-protection which prevents equipment burnout and maintains performance.
●Humanized And Durable Structure:Aluminum alloy body,lightweight，good heat dissipation;Visual fuel tank prevents oil shortage;Shock absorbing and wear resistant rubber base.
●Exquisite Workmanship:Precision gear parts;High-quality Capacitors-quick start,prevent electrical interference;5 layer filtration prevent oil spout,more environmentally friendly;NEW stator and rotor – higher stability;
All reliable parts ensure efficient operation and low noise of the vacuum pump
●Safe Transportation:Foam molded packing for keeping vacuum pump safe ,No longer worried about violent transport.

★Package Included:
●1 x NewPosition Vacuum Pump
●1 x User Manual
●1 x 200 ml White Oil Bottle Filled With Oil.

★About Us
Founded in June, 1980, “NewPosition” is a leading provider of Tools & Equipment.It is NewPosition’s mission to enhance the quality of human life by manufacturing and selling premium quality of equipment.

Specification:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Outlet PVC pipe Length:2.8m
Nylon pipe Length:1.5m
Brass pipe Length:0.7m

Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe
How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2.Then connect the cugarette light and pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Note: If you want to connect this pump to AC power, you will need a power converter.

Product Description

Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil. The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for boats, cars, trucks and more. USA dimensions: 16 inch length x 7 inch width x 11 inch height, tank size: 8 gallon, suction hose length 48 inches.

Amazon.com

Changing engine oil can be messy, time consuming and it is difficult to dispose of old oil. The LiquiVac is a user friendly and an environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, open the cap’s valve and LiquiVac extracts the oil directly into its plastic holding tank. It works great for boats, cars, trucks–and small engines too.

Quickly change the oil in large engines–works with small engines too

Cars and Trucks Oil Change

The LiquiVac Oil Changing System for Large Projects and Engines makes car oil changes quick, clean, and easy. This is especially true with hard to access drain plugs found in large engines.

An average car or truck takes approximately 8-10 minutes to extract the oil, and without a mess. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes of boats, cars, and light trucks. Plus, its tank has an 8 quart capacity allowing the user to make multiple oil changes of small engines too.

Boats

The LiquiVac innovative design makes it easier to change the oil in engines such as boats with inaccessible drain plugs. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes to make your 4-cycle outboard oil change and inboard oil change easy. Also, don’t forget the LiquiVac makes boat transmission changes very easy.

Small Engines: Lawnmowers, Generators, Power Washers, Snow Throwers, and More

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil and, eventually, engine breakdowns.

With the LiquiVac small engine oil changes are a snap. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines super simple.

Which Model of LiquiVac Is Right for You?

LiquiVac Small Engine Model

Small Engine Model

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.

But, now there’s a simple, fast and clean way to change your lawn and garden equipment’s oil. It’s the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle. Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as.

LiquiVac Large Project/Engine Model

Large Project/Engine Model

It is called the Large Project/Engine Model for a reason. Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. They can do it fast, without the mess. Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too.

The Koehler Transfer Pump Kit allows for the safe and easy transfer of liquids between containers or vehicles, eliminating the risky practice of siphoning dangerous liquids by mouth. Transfer gasoline, oil, antifreeze and other liquids simply and quickly with no mess. The pump can also be adapted to an air pump function for inflating tires, air mattresses, sports equipment, water toys and other inflatables. Each kit includes a multi-use siphon pump, 1 each liquid intake and discharge hoses, two hose connectors, 1 each inlet and outlet nozzles, an air pressure hose and dipstick tube. Ideal for auto and equipment maintenance, RV and boat owners, farm, marine and industrial operations or any other application requiring easy and efficient fluid transfers.

Specification:

Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm

Package include:

1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
 1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil 
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out

Note: If you want to connect this pump to AC power, you will need a power converter.

Mityvac offers a selection of five basic hand-held vacuum/pressure pump models, one Silver line and four Select line. Each is featured in the chart below, and differentiated by a combination of features and options described on the previous pages. By offering such a wide selection, you can maximize the value and performance of your hand pump by choosing the exact features that best meet the requirements of your application.

Description
This is our pneumatic 4.2CFM air operated vacuum pump. It is easy to operate, simply connect the Air Line and it pulls full vacuum in less than 2 minutes. This air vacuum pump is ideal for automotive air conditioners, home air conditioners, refrigerators and freezers. The air vacuum pump is a AC pump that eliminates moisture from air conditioning systems, making it safe and easy to add refrigerant.

Feature
Easy to Operate, Simply Connect the Air Line and it Pulls Full Vacuum in Less Than 2 Minutes
Suitable for R134a and R12 Automotive Use, Includes Fittings
Venturi-Type AC Pump Eliminates Moisture from Air Conditioning System, Makes It Safe and Easy To Charge Refrigerant
Perfect for Automotive Air Conditioning System, Home Air Conditioner, Refrigerators, Freezers and Much More

Specifications
Vacuum Port: 1/2″ ACME (R134a) & R12 Connector
Vacuum Capacity: 28.3” of Mercury at sea level @ 90 PSI
Air pressure Range: 75 PSI -180 PSI
Air Consumption: 4.2 CFM @ 90 PSI
Air Inlet: 1/4” – 1/8NPT
Material: Front connection:aluminum
thick connection: cooper
1 x Vacuum Pump