Best Central Vacuum System Hose

The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.

The 93565 is designed for use with all major brands of home shop vacuums. The long highly flexible hose allows for cleaning vehicles without having to pull the vacuum in tight protecting the vehicle from damage. The hose is a commercial grade hose that offers far superior airflow and clog resistance as compared to the typical home shop vacuum hose made with a process that results in stiffer corrugated interior. The accessories are designed to work like those used by professional car detailers taking advantage of the higher airflow typical in home or shop vacuums. The wide paddle crevice is ideal for sliding down between a car seat and the center Consul typical in today’s vehicles. The large opening prevents clogs and allows for the tool to pick up larger debris. The upholstery is designed to mirror popular commercial claw tools found in full service carwashes. The dusting tool is unique in the market with paintbrush soft bristles ideal for cleaning uneven surfaces. All of these tools are interchangeable to a soft grip handle, ergonomically designed to insure comfortable use. A second 24” crevice allows you to reach deep into tight spots like a dryer vent or under a low-profile Appliance. The 93565 is compatible with major home shop vacuums brands including shop vac, ridgid, works, craftsman, vacmaster, koblenz, and most other brands.

Crush-proof lightweight and easy to use, the Beam Compatible Basic Central Vacuum Hose is an upgrade to older basic vacuum hoses. Fits Standard 1.5 inch inlet valves. Nutone users: please measure your wall valve carefully as some older Nutone wall valves are smaller than 1.5 in.

The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.

This premium 12 inch wide natural bristle bare surface floor brush is ideal for vacuuming all types of bare surface floors, including marble, hardwood, tile, linoleum, laminate, parquet, and can even clean low pile rugs. The bristles are made from natural horse hair which provides a very soft brush which will not scratch even high gloss floors such as marble. The 90 degree swivel neck makes maneuvering around furniture, or underneath tables incredibly easy. The diameter of the swivel neck measures 1.25″, which will fit nearly every central vacuum system on the market, including; NuTone, Beam, VacuFlo, Hayden, CenTec, Electrolux, Dirt Devil, Hoover, MD Manufacturing, and many others. It also works with many stand alone vacuum cleaners such as Dyson, Hoover, Bissell, Eureka, and all other brands which use a 1.25″ diameter hose or wand. Risk free money back guarantee on size, fit and quality.

The 93730 is designed to use your central vacuum system in the garage or work shop for fast effective clean-up. The Cen-Tec exclusive tool set was designed with the unique cleaning requirements associated with detailing cars, boats, and RV’s. The tool set is set at a unique 30 degree angle not the typical 45 degree to relax your wrist and reduce the effort that comes from trying to position the tool at the proper angle for effective cleaning. The nylon fill dusting tool is paint brush soft with extra long fill to reach into the louvers on your car dash, the deep corner when the dash meets the windshield and down into the deep pockets on the door panels. A second dusting tool is ideal for grooming upholstery and open, hard surfaces. The upholstery tool feature can be angled down for gentle cleaning or angled up to engage aggressive teeth for raising matted carpet or releasing stuck on dirt that dries and grabs the carpet surface. The two extension wands a 12” natural fill floor brush extends the use of the 93730 to floors and walls great for capturing cobwebs or saw dust. The 30 foot crush proof commercial grade hose will last for years, even in harsh high use environments. The 93730 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac.

The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.

The 94038 is designed for new and replacement requirements for a superior air turbine floor nozzle for cleaning carpeted surfaces accompanied by the tool necessary for safe cleaning of hard floor surfaces and all above the floor cleaning needs. The 35 foot crush proof low voltage hose permits control of the central vacuum from the hose handle. The Italian made chrome steel telescopic wand is designed for the wand diameter to increase as it extends from floor to hose insuring maximum airflow. The premium cleaning accessories are ideal for cleaning hard surfaces, soft upholstery, and into tight spaces and can be carried along with you on a convenient wand mounted tool clip. The 94038 is ideal for use with all major brands of central vacuums including Beam, NuEra, Husky, ProLux, Vacumaid, Vacuflo, Canavac, Eureka, Cyclovac, Nutone, Honeywell, MD, Wal Vac, Galaxie, and Imperium.

The #90177 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also includes an installed knit hose sock to protect furnishings. It is compatible with major brands of central vac, including beam, Nutone, Electrolux, Hayden, VacuMaid, aggressor, Vacuflo, md, Canavac, Cyclovac, and Air Vac. The gentle cleaning traits of the dust brush will fit on wands for tough to reach places, and are a must for any accessory kit. It comes applied with an antimicrobial spray, which bonds with the 90177’s installed hose sock, creating a microscopic layer of organic bristle shafts proving inhospitable to mold, mildew and bacteria. The antimicrobial spray is EPA registered and is odorless, colorless and will not wash off under normal use. It protects the tool for a year or more and can be renewed as simply as reapplying the spray application. The hose also is a full 35 feet in length, and includes a soft grip handle with a great ergonomic feel.

The 93026 central vacuum accessory set is unique to the industry in that it provides two electric power nozzles. One designed for all carpeted surfaces and a second that has been designed specifically for hard floor, spot rugs, and premium area rugs. Many homes now have a mix of flooring including hardwood, stone, tile, laminate, spot rugs, area rugs, and wall to wall carpeting. The 93026 is designed to expertly clean all of these surfaces. Both electric nozzles apply the latest technology and have the premium features expected in premium electric power nozzles. As suggested by customers two integrated electric wands are provide one for each power nozzle to add convenience and speed up the task that is cleaning. The 35 foot total control hose is the longest permitted by UL/CSA standards so you are sure to reach every part of your home. Customers have shown a strong preference for the hose to be socked to protect their fine furnishings, base boards, and floor surfaces so the 93026 has a premium anti-microbial sock pre-installed. The hose has an 8 foot electric cord making the 93026 compatible with all major brands of central vacuums including, Beam, Electrolux, Eureka, MD, Vacuflo, Vacuumed, Imperium, Star Power, Cyclovac, Canavac, Husky, and Hayden. The CT25QD power nozzle is designed to effectively clean traditional carpets as well as today’s new soft fiber carpets equally well. The CT25 has a unique venting system that insures optimal air flow under the chevron brush agitator for superior embedded dirt pick-up regardless of carpet type. The double swivel neck design makes the CT25QD the easiest nozzle in the market to control. The lifetime poly-v belt drive reduces noise and vibration. The belt is inset from the edge of the brush to insure brushed edge cleaning to both sides of the nozzle. The CT10 reduces cleaning time and addresses today’s home with a mix of floor surfaces. At 1.50# the CT10 is lightweight and easy to control.