Best Dryer Vacuum Cleaner Attachment

Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator, Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap, If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. Please make sure that your vacuum hose has a diameter of 1 1/4 inches or less. some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool, This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit. Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work, Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure).

One of our most popular generic attachments, this 24.4″ long flexible crevice tool allows to clean the most hard to reach areas of your home. The attachment only fits vacuums accepting 1-1/4inch(32mm) inner diameter attachments. Please measure and make sure the size of attachment that fits your vacuum. If the tool got clogged, please take off both ends of the tool, and squeeze or poke it out with a long stick.

Keep your dryer lint trap free of potential fire hazards and debris with a smart, flexible vent cleaning kit designed for today’s modern systems.

Every time you run a load of laundry in the dryer, little fibers are left behind from your clothes that slowly begin to clog your system. And while the removable lint trap catches most of it, there is still a ton of lint, debris, and potential problems left behind. That’s why we created the Dryer Dr. Dryer Vent Cleaning Kit to help remove and eliminate this excess lint, so you can keep your family safer, reduce the potential of fires, improve dryer efficiency, and keep your dryer working harder, longer.

Product Details:

• Clean Away Lint, Debris, Dirt
• Flexible, Heavy-Duty Use
• Safe, Effective Cleaning
• Compatible with Most Vacuum Cleaners
• Satisfaction Guaranteed

Order Includes:

• Cleaning Brush (23”)
• Flexible Vacuum Hose
• Universal Connector (Fits 33mm and 35mm Connections)

Start keeping your dryer vents cleaner and clearer to improve drying efficiency and reduce safety hazards with your own dryer vent cleaning kit today by clicking ‘Add to Cart’ above.

This Generic dryer lint vacuum attachment is a Flexible Vacuum Hose which is perfect for the hard to vacuum areas of your home….You can clean under appliances and in your dryer lint trap that has a gap of a little over ⅝ inches since the thickness of the tool is ⅝ inches, To assemble the crevice tool run hot water over the ends of the hose which will make inserting ends easy. Length of vacuum tool may vary by 1/2 inch. This tool will fit most vacuum hoses using the adapters, but please measure the end of your hose to make sure it will fit. We had these Adapters designed so that they could be used together to fit most vacuum hoses. All you have to do is try inserting one adapter in to another to make what will fit your vacuum hose. ????

25″ Flexible Crevice Tool with Detachable Brush Head by GoodVac.

Includes 1 x 25″ long crevice tool attachment plus 5″ long removable brush head

This crevice tool will help you to clean all the hard to reach places were no Crevice tool has gone before… perfect for cleaning dry vents, lint traps, ducts, vents, under furniture, under fridge and many other hard to reach areas.

This tool will fit all vacuums, that use 1 1/4″friction fit attachments.

Dimensions:
Length: 25″
Width: 1 3/8″
Thickness: 1 3/8″

Fits Rainbow Model Numbers:
E2 Type 12 Black (Diamond)
E2 Blue (Platinum / Silver)
E2 Gold (Two Speed)
E2 Two Speed
E Series (E2 One Speed / E2 Gold One Speed)
SE Performance (SE PE)
D4 (D4c)

Fits Kirby Model Numbers:
Avalir (AV)
Sentria II (SE2, G10D)
Sentria (SE, G10)
Ultimate G Diamond Edition (UGD, UGDE, DE, G7D)
Ultimate G (UG, G7)
Generation 6 (G6)
Generation 5 (G5)
Generation 4 (G4)
Generation 5 (G5)

Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.

4 pack including：

29inch long flexible Dryer lint cleaning brush, 

25inch flexible nozzle hose attachment,

Round Dusting Brush Soft Horsehair  Vacuum Attachment 

1.25inch(32mm) to 1.38inch(35mm) Vacuum Adapter. 

Keeping your dryer vents clean is better to  improve drying efficiency and Reduce Potential Disasters.

Long Dryer Lint Cleaning Brush + Flexible Crevice Tool–100% Satisfaction and Money Back Guarantee

Specifications:

Duct cleaning brush kit: Length: 30 inches    Bristle Diameter； 1.5 inches

Dryer vent Never Clogged Again, Low energy consumption and Safe Running.

Vacuum Hose Attachment: Length 24 inches   Tapered Tip: 15mm Width

You can Dip the hose end into warm water to ensure an easy inserting.

Package Including:

1pcs*vent brush

1pcs*crevice tool

2pcs*adapters

The Hose Attachment Does not fit for Dyson V7, V8, V9, V10 vacuum cleaners, Fits well for Most Vacuum Hoses with a diameter less than 1.5″ , Like Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. With The Adapters, it Can Also Fit for Dyson DC35, DC44, DC45, DC48, DC52, DC58, DC59, DC62, V6 models

If you are not sure if it will fit your Shark vacuum or any vacuum you have, please ask a question and we will respond.

This is not an Shark Original product and is not covered under any Shark warranty.
The Shark brand name and logo are the registered trademark of the respective owner.
Any use of the Shark brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.

Specifications:

Type:Vacuum Hose Head

Size:35 x 6cm/13.8 x 2.4inch

Hose Length:85cm/33.5inch

Weight:185 g

Applicable to:Vacuum cleaner

Applicable Area: 51-100 Square Meters

Package Included:

1 x Vacuum Hose Head

Note:

1.Please allow 1-3mm differs due to manual measurement.

2.Due to the different display and different light,the picture may not reflect the actual color of the item.

3.Avoid breeding of bacteria, should be placed in a dry and ventialted place to dry. Dried konjac puff will harden, it will return to soft after soaking in water.

Thanks for your understanding.