Best Hide A Hose Central Vacuum

The Cen-Tec Systems 91563 accessory kit includes both the Ct10 and the Ct23 power nozzle, which combines features typical of premium power nozzles with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density soft carpets. Think of the Ct10 as your all-surface ‘everyday’ electric brush, easily sliding across all surfaces, while also being supremely lightweight and easy to use. The Ct23 brush gets the deep clean into the carpets and continues to work flawlessly on high density ultra-soft carpet. Also includes a full pack of accessory tools, wand pigtail electric hose.

The 99713 is designed to provide superior airflow in a lightweight design to address the two features most desired in a central vacuum on/off control hose. The 360 degree swivel handle is designed to reduce kinking, stress on the hose, and stress on you as the user by relaxing any tension in the hose as you move through the room. The 35 foot length provides extra reach and insure there is sufficient length to prevent tugging and pulling to reach to the corner of the room. The installed hose sock is designed to reduce the possibility of marking walls, floor, or furnishings while also avoiding wear to doorframes and chair legs. The hose is compatible with industry standard central vacuum inlets including Nutone branded valves equipped with low voltage contacts in the opening of the inlet valve. You can confirm suitability by putting your finger into the hose opening and confirming there are two low voltage contacts on the upper surface of the opening. No need for concern as these contacts are low volt and will not harm you in any fashion. The 99713 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands.

Think Crucial introduces another practical piece to your cleaning tool collection with a replacement vacuum hose compatible with Mighty Mite Hose for everyday use. Our replacement hose is 13 x 10.5 x 3 and compatible with Mighty Mite. 

Our hose pairs well with Eureka vacuum part 60289-1, models 3670, 3672, 3673, 3674, 3676, 3682, 3670A, 3670B, 3670D, 3670E, 3670F-1, 3670F, 3672A, 3672B-1, and 3676B. 

Our vacuum hose replacement part ensures deeper and cleaner surfaces. Have confidence with a refreshing, clear feeling for a home, house, office, apartment, condo, high-rise, large or small tower, while using the ozone. It’s essential for premium, deep cleaning across any surface. The suction collects fine dust particles and allergens, preventing them from recirculating into the air. Allergy sufferers, replacing the vacuum hose is necessary to maximize the vacuum cleaning power.

The long-lasting and durable hose is washable, reusable, safe, and non-toxic while helping to ensure deeper and cleaner air. Have confidence with a refreshing, clear feeling for a home space.

Forget those dirty, broken down hoses by creating an active schedule to replace hoses regularly. Switch out the hose in less than five (5) minutes and every 6-12 months to maximize time efficiency.

This is a generic product designed and engineered in the United States by Think Crucial. This is not a Eureka OEM product and is not covered under any Eureka manufacturer’s warranty. The Eureka brand names and logos are the registered trademarks of their respective owners. Any use of the Eureka brand name or model designation for this product is made solely for purposes of demonstrating compatibility. 

We’ve thought through the small details, now it’s up to you. Get started and Order Today!

The 91420 seven piece accessory set is designed for general use with most North American brands of domestic, commercial, home shop, and central vacuums equipped for use of industry standard 1.25” accessories. It is not suitable for use with European brand vacuums that have 1.375” accessories and connections like Miele, or Sebo. You can confirm suitability with your vacuum by simply putting a ruler to the hose opening and confirming the outside measurement to be slightly less than 1.25”. Typically the connection will taper slightly larger as you move back on the hose end to permit a snug fit. The nylon collar on the metal extension tubes is designed to provide some flexibility to this connection. This set is compatible with major brands of central vacuums including Beam, Eureka, Vacuflo, Vacumaid, Cyclovac, MD, and Electrolux as well as home shop vacuums equipped with a 1.25” hose including Shop Vac, Ridgid, Work Shop, and Craftsman. An ideal set of replacement accessories for many commercial back pack and commercial canister vacuums using 1.25” accessories.

The Cen-Tec 92927 central vacuum accessory package is designed to provide superior cleaning for today’s home with both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishing and we have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The universal hose end makes the 92927 compatible with all major brands of central vacuums including beam, ELECTROLUX, eureka, VacuMaid, Vacuflo, Nutone, Cyclovac, Canavac, husky, star power, Md, and imperium brands. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance. The quiet Drive poly-V Drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft Bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.

The 99484 is an individually packed 30 Ft. (9M) low voltage hose and chrome Button Lock stub tube. The hose also features soft grip handle with N style (XS6) wall end. Our low voltage hoses are high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This low voltage hose works with all standard central vacuum accessories, but since it is low voltage, it will not run electric power nozzles. It will work fine with straight air tools, like the turbocat or any non-electric accessories.

The 34498 chromed steel telescopic wand features a nylon ring collar, home to a female friction and male friction fits. The 34498’s compressed length is 23.5″ (597mm) and extends to 39″ (990mm). NO LOCKING BUTTON The versatility of a telescopic wand should be obvious – it allows the user to do above the floor cleaning and adjust the height to the operator and the job.

Cen-Tec Systems’ 94192 is engineered to connect a wide range of major power tool brands to your home shop vacuum for recovery of the debris and dust generated during the use of the power tool, keeping you and your shop clean while protecting you from airborne particulate that can harm your health. The 94192 is designed to be versatile with three unique and tool industry typical connections. The inner collar with durable acetal clip connects directly to most brands of dry wall sanders and other tools generating high volumes of dust or having large debris profiles. A bayonet fitting with 1″ soft TPE molded fitting is perfect for small power tool connections. The smooth 360 degree swivel rotation of the bayonet prevents the hose from kinking or resisting free movement of the power tool. Changing from the 1″ fitting to a 1. 50 soft TPE fitting popular on many chop saws and routers takes only a second using the quick clip system. An air relief is designed into the bayonet fitting to allow adjustment of the air stream at the tool as necessary to prevent tools sealing to the work surface. The 94192 offers a 1. 25″ X 16 foot highly flexible commercial grade vacuum hose with smooth interior to prevent clogs and maximize air flow to the vacuum. The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum. Cen-Tec’s 94192 hose is designed to fit all major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric. The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection. Compares favorably with VAC005.

The ProTeam 103048 Static-Dissipating Hose is a replacement hose that can be used with ProTeam Backpack vacuum cleaners in order to ensure the optimal performance of your unit. Each of these commercial vacuum hoses comes with a industry standard 1-1/2-inch cuff with a 90-degree elbow cuff end for enhanced ergonomic use and ease of cleaning.

A static-dissipating hose construction helps to prevent accidental shocking from static electricity build up. The vacuum hose replacement has a versatile black finish for seamless use with a variety of units. Flexible and lightweight, this Backpack vacuum hose is 16 inches long and weighs only 0.615 pounds.

ProTeam has been innovating efficient and effective cleaning solutions for over 30 years with a focus on productivity, cost of ownership, ergonomics, cleaning for health, and sustainability.

Product Description

Poolmaster’s Swimming Pool Maintenance Collection offers a generous selection of performance and built-to-last products made from resilient components designed to keep your pool sparkling. The Heavy Duty In-Ground Vacuum Hose features flexible, yet durable EVA and non-corrosive material. Swivel cuff is built in for kink-free maneuverability during the cleaning process while the spiral-wound construction adds strength, aids in flexibility and provides maximum water flow. Superior tensile strength provides crush-resistant operation. Hose should be used with a standard swimming pool vacuum head and a telescopic pole for manual pool vacuuming only and should not be used with automatic pool cleaners. Hose works best when warm to maximize flexibility. Measures 1-1/2-inch in diameter x 30-feet and is made in the USA. Note: the opening size inside pool skimmers may vary, so a fitting or vacuum plate may be needed inside the skimmer for the most secure fit and airtight seal of the vacuum hose.

From the Manufacturer

Since 1958, Poolmaster has been a leading manufacturer of aftermarket pool and spa products with an unwavering commitment to quality, service and reliability. Poolmaster offers products across six different product lines- Backyard and Decor, Inflatables, Floats, Maintenance, Swim and Dive, and Toys and Games. Poolmaster – We Make Water Fun!

The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.

The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.