Best Hss Long Drill Bits
Best results for hss long drill bits
DEWALT DW1614 1/2" x 12" Black Oxide Drill Bit
$11.89
$16.29
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- HSS-CO MATERIAL - Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- 135° SPLIT POINT - the 135° quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from "walking and wanding". Easy cutting without need of center punch.
Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel
$5.57
$6.29
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Drill America 3/16" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$9.99
$12.19
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
- Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
COMOWARE Titanium Twist Drill Bit Set – 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, 1/16"-1/4"
$13.99
$18.05
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$11.79
$14.27
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- 【TITANIUM DRILL BITS】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS. Titanium coating increases the durability of the drill bits.
- 【FULLY GROUND PROCESS & 135° SPLIT POINT】No center punch is needed. Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° Split Point with straight shank prevents walking and makes drilling precise.
amoolo Drill Bit Set (60 pcs), Titanium Coated Twist Drill Bits for Wood, Soft Metal, Plastic, Aluminum Alloys, 1/8"-3/64"
$11.99
$15.71
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- SPECIFICATIONS: 60pcs+12pcs FREE HSS titanium drill set, inch size 3/64",1/16", 5/64", 3/32", 7/64", 1/8", 12 pcs/size
- HSS MATERIAL: Industry grade high speed steel with high hardness, good wear resistance and durability.
- CHARACTERISTICS: 118° precise point with sharpened edge promises cutting speed
- titanium coating increases the ware-resistance and durability of the drill bit, effect long life drilling.
INTOO Mini Drill Bit Set 60 Pcs+12 Pcs Free High Speed Steel HSS Titanium Micro Drill Bits For Metal,Plastic,Wood 3/64"-1/8" Small drill bit
$13.99
$20.43
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- ● 6" Overall length and 2-3/4" Flute Length to ensure the best deep hole drilling in hard steel and matels.
- ● HSS Cobalt High Speed Steel, best Material for improving performance and drilling life when cutting and drilling harder metals, such as Stainless steel, or other hard steel
- ● The Gold Oxide strongthen the surface by Oxiding treatment on the Cobalt Steel, to ensure the long drilling life and better drilling performance
1/4-Inch x 6" HSS Cobalt Extra Long Aircraft Extention Drill Bit with 6" Shank, Spiral Flute, 135 Degree,Split Point, Drilling deep holes in metal and Steel (1/4X6"-3PCS)
$14.99
$19.19
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
- [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
- [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
QLOUNI 8Pcs 200mm/8” Extra Long Drill Bits Set HSS Twist Bits 4/4.2/4.5/5/5.2/6/8/10mm Round Shank Wood Working Tool
$26.99
$37.52
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$84.99
$110.49
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- Drill 3x Longer (than competitors drills), Drill 2x Faster (than cobalt), Drill Accurate (135 deg split point, tapered web geometry)
- Better than cobalt-XL5 is able to flex when cobalt drills chip or snap
- Premium high speed steel and NOMO surface treatment for longer tool life, fast penetration, and flexibility
- Self centering 135 degree split point prevents drill from walking
- Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials
Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 1/16"-1/2" x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point, Water Resistant Index-MADE IN USA
$20.87
$26.50
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- 82 degree point for faster starts
- 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over
- Fish eye hole provided near tip of flutes to aid in pulling wire
- Fish eye hole provided near tip of flutes to aid in pulling wire
MAGBIT 786.24.0816 MAG786 1/2-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit
$11.68
$15.53
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- Industry grade HSS Material drill bit set: industry grade High Quality High Speed Steel, High hardness, good wear resistance and durability.
- Super performance: Bostal Drill is one professional OEM Factory for famous brand
- High quality drill bits is prime. Perfect Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics.
- Full ground process and Titanium Surface Coating: Tin coating to enlarge the life of drill bits and longtime antirust.
BOSTAL 60Pcs Drill Bits Set 1/8 1/16 3/64 5/64 3/32 7/64 Professional Twist Drill Bit Set Industry HSS TIN Coated Jobbers Length Mini Micro Drill Perfect Use for Steel Wood Plastic Aluminum Alloy
$22.89
$25.18
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$42.69
$51.23
Amazon.com
Last update was on: November 22, 2024 2:33 pm
- 【 HSS TITANIUM COATING 】: Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean. It can be used multiple times without deformation.
- 【 TWIST DESIGN & PERFORMANCE 】 : PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. It is your ideal choice for DIY projects and household maintenance and repair.
