Best Leaf Vacuum Impeller And Housing

Rotom FB-Rotom RFB181 Inducer Furnace Blower Motor for Olsen Airco 18102 27614 117591-00.
Fits specific Olsen-Airco  HCS-2-40, HCS-2-60, HCS-2-75, HCS-2-81, HCS-2-90 units.
The inducer blower discharge orientation for this kit is lower left hand discharge. For right hand discharge usRFB200.
Replacement for numbers 18102 27614 117591-00, 702112280.
Motor Specifications:
120 Volts
1.2 Amps
3320 RPM
1/20HP
Ball Bearing
Single Speed
CW Rotation
Shaded Pole
Kit Includes Mounting Brackets, Tubing, Screws, Washers and Instructions.
Please See All Pictures

Product Description

The Hayward Super Pump large-capacity, technologically advanced pump blends cost-efficient design with durable construction, setting the standard for excellence and value. Designed for in ground pools and spas of all types and sizes, the Super Pump features a totally balanced, efficient Noryl impeller to produce higher flow rates at less horsepower than other pumps, so you can run your pump less and save on electricity. Super-sized 110 cubic-inch basket has extra leaf-holding capacity and extends time between cleanings. Rigid construction with load extender ribbing assures free flowing operation for heavy debris loads. Exclusive swing-aside hand knobs make strainer cover removal simple and easy. Lexan see-thru strainer cover lets you see when the basket needs cleaning. All components molded of corrosion-proof PermaGlass XL for extra durability and long life.

This large capacity pool pump combines durable corrosion-proof construction with state-of-the-art performance for years of trouble-free service. It easily installs on existing in-ground pool systems with a unique, stable mounting base for additional versatility. Rugged, one-piece housing, with full-flow ports, assures rapid priming and continuous operation. Service-ease design gives simple access to all internal parts. Motor and entire drive group assembly can be removed, without disturbing pipe or mounting connections, by disengaging just four bolts. Super Pump combines proven performance with quiet, efficient and dependable operation.

Amazon.com

Efficient, dependable circulation pump for in-ground pools of all types and sizes. view larger

Diagram. view larger

Super-size 110-cubic-inch basket has extra leaf-holding capacity and extends time between cleanings.

view larger

Hayward Super Pump

Efficient. Dependable. Proven. The Super Pump has all the quality features you expect from Hayward. Designed for in-ground pools and spas of all types and sizes, Super Pump features a large see-through strainer cover, a super-size debris basket, and an exclusive service-ease design for extra convenience. Super Pump combines proven performance with quiet, efficient and dependable operation.

Highlights

• Heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation
• Exclusive swing-away hand knobs for easier strainer cover removal: no tools required, no loose parts, no clamps
• See-through strainer cover lets you see when the basket needs to be cleaned and eliminated guesswork; special self-adjusting seal ensures dependable sealing
• 110-cubic-inch basket has extra leaf-holding capacity; load-extender ribbing ensures free-flowing operation
• Service-ease design gives simple access to all internal parts
• Self-priming (suction lift up to 10-feet above water level)
• Heat-resistant, industrial-size ceramic seal is long-wearing and drip proof
• Mounting base provides stable, stress-free support, plus versatility for any installation requirement; adapts 48- and 56-frame motors

Performance Data
Max Rated Model No.	Pump Output (GPM) vs. Total Resistance to Flow (Feet of Head)
	20 ft	30 ft	40 ft	50 ft	60 ft	70 ft
SP2600X5	48	38	23	—	—	—
SP2605X7	61	52	41	25	—	—
SP2607X10	74	65	54	40	9	—
SP2610X15	83	75	65	53	36	—
SP2615X20	122	111	98	84	66	38
SP2621X25	117	107	97	86	74	58

Performance Data – Low Speed
Max Rated Model No.	Pump Output (GPM) vs. Total Resistance to Flow (Feet of Head)
	5 ft	10 ft	15 ft	20 ft	25 ft	30 ft
SP2607X102S	39	29	13	—	—	—
SP2610X152S	41	32	18	—	—	—
SP2615X202S	63	51	35	—	—	—

General FAQ’s for All Hayward Pumps

How does my in-ground Pump operate?

• Hayward in-ground pumps are self-priming centrifugal pumps. These pumps have a vacuum chamber, commonly known as a pump housing. The pump housing must be filled with water in order to create a vacuum, resulting in the pump drawing the water out of your pool or spa. The pump housing will remain full of water while the pump is on, and will remain full or partially full when the pump is shut off.
• When powered on, the motor will begin to rotate. Two-speed pumps will power on a pre-selected speed or with some controllers, it will cycle at high before changing to the lower speed. The motor spins the pump impeller, located inside the pump volute. While the motor is rotating, the tips of the impeller are hydraulically sealed inside the pump diffuser, which is responsible for self-priming.
• Self-priming can only occur if the pump has a diffuser–all in ground Hayward pumps have an internal diffuser. It helps to eliminate any air approaching into the pump housing from the suction piping. As all the air is removed from the system, you will notice bubbles returning to the pool through the return fittings. A full prime occurs when the bubbles stop returning to the pool and the pump basket is full of water. The filter pressure will rise as the pump reaches full prime. The actual gallons per minute (GPM) vary with the type of pump, horsepower, pipe size, distance from pool and other restrictions within the plumbing system.
• Hayward self-priming pumps are very dependable and simple in design. They require a sufficient supply of water from the pool or spa, and no air in the suction lines. Air could come from a loose strainer cover, a leak in any valve, a pinhole in any suction line or a crack or loose connections in the underground piping.

Do I need to have a strainer basket in my pump pot?

• Yes. Without the strainer basket, debris will clog the impeller in the pump volute causing the pump to cease moving water. Be sure to clean your strainer basket, as well as the skimmer baskets, so water flow is not obstructed and the pump is not overworked.

How do I winterize my pump?

• To winterize a Hayward Pool pump, turn off the electrical circuit breaker that supplies power to the pump. Also, make sure that there is NO water left inside the pump. All Hayward pumps are equipped with drain plugs that will allow excess water to drain once the plugs are removed. Contact your local Hayward dealer for proper winterization procedures.

How many hours per day should I run my pump?

• There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.

(View larger)

Reference Number	Description	Number Required	Part Number
			Model SP2610X15
1	Hand Knob	2	SPX1600P
2	Swivel Nut	2	SPX1600N
3	Strainer Cover	1	SPX1600D
4	Strainer Cover Gasket	1	SPX1600S
5	Basket	1	SPX1600M
6	Drain Plug w/ Gasket	2	SPX1700FG
7	Pump/Strainer Housing	1	SPX1600AA
8	Diffuser Gasket	1	SPX1600R
9	Diffuser	1	SPX2600B
10	Impeller	1	SPX2610C
11	Seal Assembly	1	SPX1600Z2
12	Housing Gasket	1	SPX1600T
13	Seal Plate	1	SPX2600E5
14	Motor Mounting Plate	1	SPX1600F5
15	Housing Cap Screw	4	SPX1600Z4
16	Motor Cap Screw	4	SPX125Z4
17	Mounting Foot [includes adapter (19) and screws (18)]	1	SPX2600G1
18	Mounting Foot Cap Screw	2	SPX1600Z52
19	Mounting Foot Adapter	1	SPX2600Q
20	Slinger	1	SPX0125F
21	Motor – 60 Cycle Single Phase [includes slinger (20)]	1	SPX1610Z1M

110V 250W US Style Electric Blacksmith Forge Blower
1,Voltage(V):110V
2,Power:220W
3,Current (A):1.6A
4,Wind pressure(Pa):380Pa
5,Air volume(M3 / min):3.3
6,Rotating speed(R / min):3000
7,Frequency(Hz): 50/60Hz
This is a 110V electrical blower, classial and collectalble, it’s convenient for Blacksmithing,1 year international warranty.

Lighter particles are captured in the dust filter bag which extends life of impeller and housing and allows easy removal of collected particles. 7-inches of H2O max. static pressure. 3/4-hp 115/230VAC motor, 9.4/4.7 amps, 5500 fpm, 600 cfm. Importe

Toro Electric Blower Vac Impeller Fan

Product Description

Greenworks 12 Amp Blower Vacuum features a metal mulching blade, 6-speed variable dial, 235 MPH, 380 CFM, tool-less blower to vacuum conversion, cord lock, cushioned overmold grip, durable vacuum bag, and 4-year warranty

From the Manufacturer

The GreenWorks products that you purchase have a ZERO carbon footprint. We’ll say that again – our entire product line will never release an ounce of carbon emission into the air. 4 Year Warranty – Double The Industry Standard. When looking for lawn tools, we know you’re thinking about quality. You’re looking for something that will get the job done and get you back to your weekend. That’s why GreenWorks backs every tool with a full four-year warranty – we know our products will perform at the highest level and always be reliable. GreenWorks high quality products are manufactured to last. That’s why we back every product with a warranty that’s twice the industry standard. We’ll provide all the power you need without polluting the air or forcing you to keep hauling your gas can to the nearest station (especially in the middle of a mow). No more tune-ups or maintenance. No more emissions. Fifty-four million Americans mow their lawns every weekend, according to the EPA, using 800 million gallons of gas each year. Along the way, homeowners spill more than 17 million gallons of gas while refueling. That’s equivalent to the 1989 Exxon Valdez disaster. It’s time to move beyond clumsy, harmful gas-powered mowers. It’s time for GreenWorks to be your lawn tools for life.

This is an O.E.M. authorized part. Fits various MTD models. OEM Part Number 719-0329. The product is manufactured in US.

BillyGoat KV Vac Shredder Screen. Shreds dry leaves and organic debris to a fraction of its normal size. Installs in the housing.