Best Vacuum Cleaner Attachment Kit

Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.

Applicable Model:

for All 1.38inch(35mm) 1.25inch(32mm) Vacuum Cleaner

Package Included:

1*crevice tool

1*horsehair bristles round brush

1*utility nozzle with brush

1*upholstery tool

1*nozzle combination tool

1*Vacuum Attachment

1*Adapter

Suggestion:

To keep your vacuum operating at peak performance,Please change vacuum attachment every 1-3 months

Contact Us:

Anboo is a Professional vacuum cleaner accessories vendors, not only have a Professional manufacturer, as well as a Professional team. Any problems, we will resolve for you within two business days.

Attention:

Attention:

The kit is only for vacuums accepting 32mm or 35mm inner diameter vacuum cleaners, Please measure and confirm your vacuum attachments inner diameter before purchasing

Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator, Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap, If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. Please make sure that your vacuum hose has a diameter of 1 1/4 inches or less. some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool, This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit. Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work, Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure).

Product Name:
EZ SPARES Micro Mini Vacuum Attachment Kit

Shipping List: 8Pcs Tool Attachments

The inner diameter: 1 1/4 inch(32mm). Please check the right inner diameter.

Applicable Model : For Most Vacuum Cleaner.

Note: Please allow 1-3mm error due to manual measurement.

About EZ-SPARES:
Since the establishment of our company in 2009,we have been committed to produce and supply the best spareparts of home appliances for the customers in the world.
Now we are offering the most comprehensive coverage of electrical appliance replacement parts for households over 40 countries.Choose EZ SPARES, we will be your good helper to provide a more convenient,comfortable and healthier lifestyle for you and your family.

NA

All of these attachments will fit all Vacuum Cleaner models that use the standard 1 1/4″ hose attachments. The extension hose will attach to the following vacuum cleaners, allowing you to use the attachments that are included in this set. This hose has been tested to be compatible only with the following vacuum cleaners and Central Vacuum Cleaning systems, including the Shark Navigator, Shark Navigator Lift-Away Professional model numbers NV22L,NV60, NV70, NV71, NV352, NV355, NV356E, NV357, NV401, NV360, NV540 UV440, NV771, NV810, UV440 26, Shark Navigatior DLX, Shark navigator deluxe (NV60), Carpet Pro 2t, Eureka Mighty Mite, Sanitaire Mighty Pro Canister, Hoover WindTunnel Max, Simplicity Upright, any upright Panasonic vacuum, Please Note: Your current vacuum still necessary and needs to be connected to your vacuum cleaner. Your current hose needs to first connect to this new extension hose and then the new attachments connect to the new hose. This new hose is not designed to replace your current hose, This hose is designed to attach to your current hose to extend the reach of your current hose. Only the new attachments included with this kit will fit this new extension hose, it is designed to attach to your current hose to extend the reach of your current hose. Your old attachments are not compatable and will not fit or can be used with this tool kit.

USES: Lower your electric bill by cleaning lint, dust, and cat fur from your compact dryer lint removal trap filter, air path, refridgerator and freezer condensor coils, exhaust vents, AC vents, or just your radiators and tight crevices under counters, appliances and hard to clean areas.

Keeping your dryer vents clean is better to improve drying efficiency and Reduce Potential Disasters.

SAVE MONEY: A clean dryer vent reduces clothes drying time, and clean refrigerator condenser coils cools down the contents faster, thereby making the two highest energy consuming products more energy efficient.

Specifications:

Duct Cleaning Brush kit: Length: 31 inches. 

Hose Attachment: Length 24 inches.

Adapter:1.25 inch(32mm) Vacuum Adapter, Dyson Adapter.

Universal Replacement 32mm (1 1/4 inch) Vacuum Cleaner Accessories Brush Kit for Standard Hose Set of 6

Product description:

High quality, robust plastic construction

Suitable for use with standard 32mm (1 1/4in) diameter vacuum cleaners

Save money ,economical and practical vacuum cleaner accessory set

Wet or dry vacuum crevices tool for cleaning tight spaces

Utility nozzle with plastic brush, the brush can be removed, for floor cleaning

Horsehair bristles round brush, for cleaning and dusting tables and counter tops

Nozzle Combination Tool, designed to clean the crevice and dust the board

Upholstery tool ,Anti-static Perfect for cleaning sofa, stairs and small areas

Package Include:

1*crevice tool

1* horsehair bristles round brush

1*utility nozzle with brush

1* upholstery tool

1* nozzle combination tool

Attention:

The kit is only for vacuums accepting 32mm or 35mm inner diameter vacuum cleaners, Please measure and confirm your vacuum attachments inner diameter before purchasing

Maximal Power EIGHT (8) piece cleaning & detailing kit – MINI / MICRO Vacuum Cleaner Attachment Tools. Universal Kit Features: 1. Eight piece kit coverts most common household vacuums into powerful mini vacuums, allowing you to clean more most hardest to reach areas; 2. Two piece adapter tube slides on easily to almost any vacuum hose, making for a simple installation and quick cleaning! 3. Finally you can clean those hard to reach areas, like in between the keys of a keyboards, inside the vents and fans of a computers, inside the vents and in between the seats of your car, in your speakers and stereo equipment, and much more! 4. Any little crack or crevice is now easily cleaned! 5. Fits: Uprights that have attachment hoses, most canister vacuums and all central vacuum systems! 6. Quantity: 7 Attachment Tools + 1 Hose. It works with Bissell, Dirt Devil, Dyson, Electrolux, Hoover, Kenmore, Mile, Oreck, Panasonic, Shark, etc. NOTE: Universal Kit has a 2-sided adapter tube, with 3-step tapper on one side & progressive tapper on the other. The tapper’s smallest size is 29mm (1.15″) and its largest size is 38mm (1.50″). Please ensure this size can fit either over or inside your vacuum hose and/or attachments. The length of the hose provided is 910mm (35.75″) long. Each tool uses this hose which is connected to the one of the two adapter tubes.

4 pack including：

29inch long flexible Dryer lint cleaning brush, 

25inch flexible nozzle hose attachment,

Round Dusting Brush Soft Horsehair  Vacuum Attachment 

1.25inch(32mm) to 1.38inch(35mm) Vacuum Adapter. 

Keeping your dryer vents clean is better to  improve drying efficiency and Reduce Potential Disasters.