Best Vacuum Pump Oil Delaval

You are looking at a kit of vacuum pump and hardware for Milker Milking Pulsators: Kit include a 6cfm single stage vacuum pump, Vacuum Control Regulator relieve valve with a barbed Tee, Deep Vacuum Gauge with a Tee adapter to 1/4″ flair port, and an adapter from 3/8″(pump port) to 1/2″ Barb for pulsator hose connection. For all the milker makers for cows, sheep and goats. FEATURES: Single stage vacuum pump 1/2HP, 6 CFM, with 1/4″ and 3/8″ flair ports. Vacuum Gauge, analog 2.5 inch gauge up to 30 inch Hg with a Tee adapter to 1/4″ flair pump port Vacuum Regulator, relieve valve, Adjustable Range: 13 to 29 inch Hg; with a Barbed Tee adapter to 1/2″ hose line. Adapter from 3/8 ” Flair to 1/2″ hose connector Total Weight: 25 lb All yu need is the milker and the connection hose, 1/2″, for milking operation, NOTE: we have oilless pump for milking as well, look for model CWVP5 or CWVP4 for details. Oil-less pump are highly recommended for milking: no oil needed no oil mist problem, and cold start. more products available from w3 dot milkersupply dot com

Controlled Portable Cow Milker Machine with 5.5 CFM oilless Vacuum Pump, 25 Liter Clear Plastic Milk Pail Bucket, Pulsator, Claw Cluster, gauge and regulator, and all the air and milk Hoses included. Just make a few connections, you are ready to milk cows one at a time. Save the oil = Save the money on the run! FEATURES: Simple Portable Cow Bucket Milker Machine with All the Parts Needed:6CFM vacuum pump, 25 Liter Clear Milking Pail, Claw Pulsator, Shells and Liners, the air and milk Hoses. Tested and Proven Working by hundreds units sold in the Hands of Small Farmers. Just make a few connections of the hoses, you are ready to milk cows, one at a time. Zero maintenance cost, no oil needed and no oil-mist problem! Come with 5.5 CFM oil-less twin piston vacuum pump Milker Bucket: Clear Plastic 25 liter bucket with lid and liner Pulsator Model P80(L80) Milk Claw with air and milk hose connection Teat cups: SS with rubber liners and hose 5 feet 1/2 ID 3/4 OD thick-wall vacuum hose to connect the vacuum pump to the milk tank 9 feet 5/8 ID thick milk hose, and 9 feet double pulsation air hose to connect the pulsator to the milk claw All parts are brand new, rubber parts are stretchable Save the money for oil, eliminate the oil problem where ever you want to place the milker! Save time cleaning!

The Kozyvacu&#174 TA500 has been performance and relibility tested to meet Kozyvacu’s high standards. Its power and capacity meets for a wide range of service applications, it delivers a high CFM rating for fast thorough evacuation.

Features:

• High torque design for easy startup and efficient operation; and a Die-Cast Aluminum Housing – Cast aluminum housings make the pumps lightweight while durable. it is easy to start and maintenance free.
• Thermally protected motor to make it durable for long time duty.
• Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining;
• Oil Fill Port – Makes adding oil simple since the port is accessible from the front or either side.
• The sight glass on the front of the pump shows you when enough oil has been added;
• High Efficiency and Low Noise
• ON/OFF Switch Non Slip Cushion Handle
• Foam molded packing for safe transportion.

Specification:

• Free Air Displacement(FAD): 5.0CFM
• Power: 1/2 HP
• Stage: 2
• Voltage/Frequency: 120V/60HZ
• Ultimate Vacuum: 0.3 PA, 25 microns
• 1/4 inch flare female x 1/2 inch Acme male
• Oil Reservoir Capacity: 380ML

Dimension and Weight:

• Net dimension and weight is 12.6×5.3×9.2 inches, 19.0pounds,
• Shipping dimension and weight is 14.2×7.1×11.4 inches, 21.0pounds

Package Included:

• 1 x Kozyvacu TA 500 Vacuum Pump
• 1 x 380ml White Oil Bottle Filled With Oil.
• 1 x User Manual

The OEMTOOLS fluid Evacuator has a 1.4 gallon (5.6 Quarts) reservoir with hand operated pump to tackle Big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.

FEATURES: UPGRADED TO INCLUDE PRESSURE CONTROL HARDWARE: same as Model: CWG10WP5 A Complete Simple Goat Milker with the parts as listed bellow for single station goat milking Just connect a few hoses, easy to assemble and operate, light to carry to milking site Come with 5.5 CFM oil-less twin piston vacuum pump, good for goat and cow milking Come with 10 Liter milker SS seamless bucket with lid and liner Claw: Bottom unload; with relief valve on the claw, clear PC cover to see the action. Large Clear plastic Milk-shell/Teat cups with matching white Silicone inflation liners, for regular sized goat milking. (Nigerian shell/liner cluster available, free to switch, email seller before shipping.) Clear PVC Flexible milk hoses: Use between milk tank and the claw, 5/8 inch ID, 1 inch OD, thick wall, 9 feet long Clear PVC Flexible Air hoses: Use between pulsator on milk tank and the claw, 1/4 inch ID thick wall, 9 feet long Plus short Air hoses and milk hoses between claw and the shells, Clear PVC flexible Zero maintenance cost, Save the oil, eliminate the oil problem where ever you want to place the milker! Save time, too. Packing List: Vacuum pump: Twin piston oilless pump, 5.5CFM 3/4 HP 110VAC, 1 unit Milk Tank for milking goat: 10 liter capacitor with lid and liner, one unit Pulsator: model L80, 1 unit Goat claw Cluster: 1 unit, come assembled together with these parts: all made of food grade materials: Goat Milk claw: 1 unit. Liners for teat cups: 2 units short Air hose, clear PVC flexible: 2 units Short Milk hose, clear PVC flexible: 2 units Vacuum hose between pump and milk bucket, thick wall, 1/2 inch ID, 5 feet long, clear PVC flexible: 1 unit Milk hose, thick wall 5/8 inch ID, 9 feet in length, clear PVC flexible: 1 unit