The easiest way to remove dirt and debris from your spa. Works without batteries, hoses or other complicated hookups. Utilizes a simple siphon action.

The Pool Blaster Aqua Broom, is one of the most affordable battery-powered pool and spa vacuums ever made! More powerful than any wand-type cleaners, this product comes with a reusable All-Purpose filter bag as well as (2) disposable microfilter bags for extra fine cleaning. Completely cordless, you can even attach this product to any standard-sized pool pole for extended reach cleaning!

Product Description

Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil. The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for boats, cars, trucks and more. USA dimensions: 16 inch length x 7 inch width x 11 inch height, tank size: 8 gallon, suction hose length 48 inches.

Amazon.com

Changing engine oil can be messy, time consuming and it is difficult to dispose of old oil. The LiquiVac is a user friendly and an environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, open the cap’s valve and LiquiVac extracts the oil directly into its plastic holding tank. It works great for boats, cars, trucks–and small engines too.

Quickly change the oil in large engines–works with small engines too

Cars and Trucks Oil Change

The LiquiVac Oil Changing System for Large Projects and Engines makes car oil changes quick, clean, and easy. This is especially true with hard to access drain plugs found in large engines.

An average car or truck takes approximately 8-10 minutes to extract the oil, and without a mess. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes of boats, cars, and light trucks. Plus, its tank has an 8 quart capacity allowing the user to make multiple oil changes of small engines too.

Boats

The LiquiVac innovative design makes it easier to change the oil in engines such as boats with inaccessible drain plugs. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes to make your 4-cycle outboard oil change and inboard oil change easy. Also, don’t forget the LiquiVac makes boat transmission changes very easy.

Small Engines: Lawnmowers, Generators, Power Washers, Snow Throwers, and More

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil and, eventually, engine breakdowns.

With the LiquiVac small engine oil changes are a snap. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines super simple.

Which Model of LiquiVac Is Right for You?

LiquiVac Small Engine Model

Small Engine Model

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.

But, now there’s a simple, fast and clean way to change your lawn and garden equipment’s oil. It’s the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle. Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as.

LiquiVac Large Project/Engine Model

Large Project/Engine Model

It is called the Large Project/Engine Model for a reason. Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. They can do it fast, without the mess. Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too.

Description:

This high efficient pump is an ideal equipment for quick and clean oil-changes. It works great for pumping engine oil, diesel and heating oil. About the installation, you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.

Specifications:

Material: Plastic & Aluminium

Color: Black, Yellow

Input Voltage: DC 12V

Wattage: 60W

Current: 5A

Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min

Diesel Flow Rate: approx. 250L / Hour

Inlet Hose Length: approx. 155cm/61”

Inlet Hose Outer Diameter: 6mm/0.236”

Inlet Hose Inner Diameter: 4mm/0.157”

Outlet Hose Length: approx. 124.5cm/49”

Outlet Hose Outer diameter: 12mm/0.472”

Outlet Hose Inner Diameter: 10mm/0.39”

Line Length: approx. 71cm/28”

Package Weight: approx. 1070g

Package Included:

1 x Pump

1 x Outlet Hose

1 x Inlet Hose

2 x Hose Clamps

2 x Battery Clamps

Note:

1. NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (petrol, gasoline, etc.)

2. The working-period for this oil-extractor should not exceed 30 minutes.

3. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.

Product Description

Specification:

• Wattage: 270 watts
• Maximum Head: 23 Feet
• Intake: Screened
• Discharge: 1″ FNPT
• Housing: Glass-filled polypropylene
• Shaft Seal: Nitrile
• Approximate Weight: 14 Pounds
• Warranty: 3 Year manufacturer’s warranty

Little Giant APCP-1700 (577301) is a 115-Volt Automatic Pool Cover Pump with a low energy consumption, permanent-split capacitor (PSC) 1/3HP motor. It has Screened Intake, 1 in. FNPT Discharge, Glass-filled polypropylene Housing and 25 in. power cord. The APCP-1700 model activates in approximately 2 in. of water and deactivates in approximately 1.5 in. of water. The APCP-1700 has a wide base design for needed stability. Intermittent Liquid Temperature is up to 120 degree F. Little Giant APCP-1700 is ideal for removing water from all types of pool covers. The 1700 GPH performance was obtained through a 1 in. I.D. tube, with friction losses neglected. Using a 3/4 in. garden hose 50 foot long reduces this performance to approximately 500 gallons per hour due to friction losses in the hose. If your area frequently has heavy rain falls, (1 in. – 2 in. per hour), it may be necessary to use 1 in. tubing. This should be available in most pool supply stores.

From the Manufacturer

This Little Giant Automatic Submersible Pool Cover Pump removes standing water from pool covers and is ideal for household water transfer applications. It comes with a removable intake screen for easy cleaning and maintenance. It has a built in handle for portability and ease of placement and removal. It connects to a 3/4-Inch garden hose connection. It also has a integrated float switch for reliable automatic operation – activates in 2-Inch of water.

About The Wekster 3-in-1 Multi-Use Large Siphoning Pump Kit with Air Inflating Adapter

The Problem:
Whether your car is out of fuel or in need of an oil change, or you just want to storage power equipment for off season by draining its liquid, why pay top dollars for the easy to do job?

Our Solution:
The Wekster Leak-Free Manual Hand Siphon Pump Kit with Long Hoses and Adapters, for transporting liquids like oil and gas.

Kit Includes:

Intake & Discharge Hand Pump

Dipstick Tube

Air Pressure Hose

2 Red Hoses

2 Black Safety Connectors

Inflator Nozzle

Blower Nozzle

Tube Connector

Rapid Transfer:
Quickly transfers liquids up to 3 gallons per minute, and air with just a few easy pumps.

Long Hoses:
50-Inch long red hoses are durable and thick accessing hard to reach places.

Easy to Clean:
Easily disassembles for proper cleaning (Recommended after transferring petrol or flammable liquid).

Important Tip:
For proper siphoning, the discharge hose must be lower than the intake hose.

Benefits:

Essential oil extractor tool for vehicles

Suctions gas/oil from jet skis tanks

Drains liquids from hard to reach areas like drums

Pumps out excess overfilled liquid

Great spout for refilling transmission fluid

Bilge liquid removal tool on boats

Inflate car or stroller tires, air mattresses, balls and balloons

Evacuate air from chambers and barrels

Repair window air conditioners

Also useful for cooking and baking

During brewing separate sediment from liquid

Best squeeze tube bulb pump alternative

Can be used as a sump pump

Works in places that funnels will not fit

Complete using instructions included

Save Money and Do Your Draining/Transferring by Yourself!

SereneLife Model : PHSPAMT22

Bath Tub Bubbling Body Massage Mat

Serene Life Bubble Bath Mat Body Spa Massage

Features:

What’s in the Box:

Technical Specs:

The Serene Life Bubble Bath Massage Mat will bring spa day to your tub! The external air pump is designed to sit beside your bath tub, while the air hose delivers soothing bubbles to help you relax. The fully submergible bath mat is completely waterproof and features a suction cup bottom for non-slip comfort. The cushioned & padded surface texture of the mat helps melt the stress away as you control the bubble-flow intensity. Simply drop the mat in the tub & relax with the Serene Life Bubble Bath Tub Massage Mat.

Specification:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Pressure: Max. 0.8MPA
Maximum Flow: 5L/min
Color: Black
Pump Diameter: Approx. 4.8cm/1.89″
Length: Approx. 14.5cm/5.7″
Outlet pipe size(Dia.*L): Approx. 10mm*137cm
Inlet pipe diameter: Approx. 8mm,6 mm ; Length: Approx. 110cm/43.3″

Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move;
then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely);
as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
5.If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Note:
If you want to connect this pump to AC power, you will need a power converter.
Make sure the engine up to operating temperature!

Description
SEAFLO’s SFDPA1-033-045-33 has an incredible feature list, high quality components, and amazing performance. UL 778 & CSA 22.2 Certified. The three-chamber high volume design, driven by a heavy-duty motor produces flow rates of 3.3 GPM. It is capable of self-priming up to 6 vertical feet and can run dry making it the price to performance leader. Everything in pictures is included such as a 51S01 Filter – 1/2 NPSM Inlet/Outlet and a 51F01 Fitting – 1/2 FNPSM x 1/2 Barb. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 115VAC 33-Series can be used in a variety of applications and industries such as marine, boat, RV, industrial, and janitorial thanks to its versatility.

Details
BRAND NEW SEAFLO SFDPA1-033-045-33 Industrial Water Pressure Pump
Sleek finish in Orange and White SEAFLO colors
UL 778 & CSA 22.2 Certified
Plugs into your standard wall outlet for ease of use
Self-priming up to 6 vertical feet
Features an automatic pressure switch that can be adjusted
Built-in check valve
Capable of run dry operation
Ignition Protected
Suitable for food grade applications

**For best results, please use supplied fittings. If using metal fittings, use caution when tightening**

Technical specifications
Voltage: 115VAC
Flow Capacity: 3.3 GPM
Amperage Draw: 0.75 A (MAX 1.2 A)
Valves: Viton
Diaphragm: Santropene
Inlet/Outlet: 1/2″ Threaded MNPT
Dimensions: Approx. 7.98″ x 5.11″ x 4.84″

Product Description

The Aquabot Pool Rover Junior is specifically designed for anyone with a flat-bottom above-ground pool. Designed to be simple to use and service, the Pool Rover Junior is built with a powerful pump motor to ensure the needed suction power that many above ground pools demand. This cleaner is also equipped with an adjustable axle pin to help maximize coverage and prevent cable tangling. Not all pool cleaners are created equal. Advances in Aquabot robotic technology have enabled us to offer many advantages to antiquated cleaning traditions that can truly make a difference in the quality of your pool experience. At Aquabot we believe in crystal clear water with fewer chemicals and a healthier clean.

Amazon.com

Leave the hassle of heavy, tangled hoses behind, and improve the functioning of your pool’s filtration system with the Aquabot Pool Rover Jr. Robotic Aboveground Pool Cleaner. The Aquabot Pool Rover Jr. is an easy, fast, and efficient way to clean any aboveground pool regardless of shape or size. Simply turn the robotic cleaner on and drop it into your pool. The Pool Rover Jr.’s 24-volt pump motor will filter water and scrub even the toughest dirt from your pool floor with vacuum suction and a patented jet-drive propulsion venture system.

By reducing the amount of time your pool’s filtration system has to work, the Pool Rover Jr.’s filtering and cleaning capacity reduce the chemical, water, and energy costs associated with the maintenance of your pool.The Pool Rover Jr. is equipped with its own internal pump and filtration system with a reusable state-of-the-art filter bag to trap algae and bacteria as small as two microns, as well as dirt, leaves, and sand. The safe and efficient 24-volt motor is inexpensive to operate and cleans most pools in under one hour. The Pool Rover Jr. has extra-wide non-marring wheels that roll over any surface ripples or footprints to clean your pool completely and will not get stuck in ladders or corners. The unit has an easy-to-set guidance system that will clean aboveground pools of any shape.

Specifications:

• 40 feet of floating cable
• Built-in 2-micron fine reusable filter bag
• Power supply transformer
• 2-hour automatic shut off timer
• 24-volt pump motor
• Removes large leaves to algae as small as 2 microns
• Reduces chemical, water and energy costs
• Internal pump
• Guidance system
• Extra-wide non-marring wheels
• Made in the U.S.

Manufacturer Warranty
One-year for motor

See all Product description

The OEMTOOLS fluid Evacuator has a 1.4 gallon (5.6 Quarts) reservoir with hand operated pump to tackle Big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.

The Pool Blaster Catfish Li cleans all types of pools, spas, kiddie pools, and more! The cordless design and powerful Lithium Ion battery ensures the cleanliness of whatever water residential water application. Use by hand, or attach to any standard-sized pool pole with this lightweight, user-friendly and very affordable Pool Blaster vacuum! Crevice Corner Nozzle -Yes

This high efficient self-priming oil extractor pump is easy to use.

You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.

The oil will simply draw out the motor through the oil dipstick bore.Simple On/Off Power Switch.

High flow rate: 3L/min flow rate for engine oil, 4L/m for diesel.

Portable and lightweight design that you can take anywhere.

To effectively and quickly transfer oil,Diesel,this Home Use Mini Type Electric Oil Liquid Transfer Pump is undoubtedly your best choice!

Though it is in small size, it functions greatly and powerfully.

Thanks to its sophisticated workmanship based on reliable materials, this pump is safe, durable and easy to operate.

Power-driven design makes it quite labor-saving and convenient than manual ones.

For safety purposes, take special care when handling inflammable goods or fuels.

You should avoid using low burning fluids such as gas, paraffin, petrol, etc and only work with fuels that have high burning points.

Wide range of applications, it can apply for your: Cars,Motorcycles,Vans,Quads,Truck,Forklift,Generator,Tractor,Scooter,Boat,and Other 12v Vehicles.

Note: NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (petrol, gasoline, etc.).

Specifications:

Voltage: 12V DC

Rated Power: 60W

Max Current: 5A

Color: Black & Yellow

You will get:All you see in the picture.